Parts, Components, Assemblies

List Price MPB-2011

click for specsheetA1 Universal Body
Universal body for floor drains, roof drains and cleanouts
List Price
A2 BodyList Price
click for specsheetA2-BP Roof Drain Sump Receiver
Specification: MIFAB Series A2-BP-DP lacquered 18 guage galvanized steel sump receiver with a double recess to receive the flange of the roof drain body flush and to bolt the roof drain body to the underside of the sump receiver.
List Price
click for specsheetA2-BP-DP Topsider Bolt on Sump Receiver
Specification: MIFAB Series A2-BP lacquered 18 guage galvanized steel sump receiver with a recess to receive the flange of the roof drain body and hardware to bolt the roof drain body to the underside of the sump receiver.
List Price
A3 BodyList Price
A4 BodyList Price
A5 BodyList Price
click for specsheetA7 Deep Sump Body for Roof Drains
Specification: MIFAB Series A7 lacquered cast iron deep sump body with 16 5/16″ diameter anchor flange
List Price
A8 Body for R1200-JD-STR Series Roof DrainsList Price
Membrane Clamps and HardwareList Price
click for specsheetA1-C2 Membrane Clamp
Universal membrane clamp for floor drains and cleanouts
List Price
Strainers, Grates and HardwareList Price
click for specsheetEF-4-1,3 4″ Round Funnel Strainer
Specification: MIFAB Series EF4-(*) (* indicates strainer material), 5″ reinforced round strainer, with a free area of 8 square inches combined with a 4″ round funnel. Available in nickel bronze (Suffix -1) or cast iron (Suffix -50).
List Price
click for specsheet4×2-1 Floor Drain Strainer
Specification: MIFAB Series 4×2-1, 4 1/8″ reinforced round solid nickel bronze strainer and shank, with a free area of 5 square inches and a load rating of 2000lbs.
List Price
click for specsheet5-1 Nickel Bronze Strainer
Standard nickel bronze floor drain strainer with 1/4″ slots, 1/4″ thick.
List Price
click for specsheet5-28 5″ Floor Drain Strainer
Specification: MIFAB Series 5-28, 5″ reinforced round solid 304 stainless steel strainer, with a free area of 5 square inches.
List Price
Area Drain Top AssembliesList Price
click for specsheet6-1,3 – 6″ Round Floor Drain Strainer
Specification: MIFAB Series 6-(*) (* indicates strainer material), 6″ reinforced round strainer. Available in nickel bronze (Suffix -1) or stainless steel (Suffix -3).
List Price
click for specsheet6S-1 – 6″ x 6″ Cleanout Top
Specification: MIFAB series 6S-1, 6″ x 6″ reinforced square solid nickel bronze combined cover and plug cleanout top, equipped with a primary neoprene gasket gas seal and secondary o-ring test seal. This cleanout complies with ANSI/ASME load rating of up to 4,999lbs. Also available in stainless steel (Suffix -3).
List Price
click for specsheetS6-1,3 6″ x 6″ Floor Drain Strainer
Specification: MIFAB Series S6-(*) (* indicates strainer material), 6″ x 6″ reinforced square strainer. Available in nickel bronze (Suffix -1) or stainless steel (Suffix -3).
List Price
click for specsheetS-1,3 5″ x 5″ Cleanout Top
Specification: MIFAB Series S-(*) (* indicates strainer material), 5″ x 5″ reinforced square combined cover and plug cleanout top, standard with a primary neoprene gasket gas seal and secondary o-ring test seal. Available in nickel bronze (Suffix -1) or stainless steel (Suffix -3).
List Price
click for specsheetSD6-1 – Secondary Grate with Solid Hinged Cover
Specification: MIFAB Series SD6, 6″ x 6″ reinforced square nickel bronze strainer with solid hinged cover, with a free area of 12 square inches, and a load rating between 5000 to 7499 lbs. Also available in stainless steel (Suffix -3).
List Price
F1000 through F1100-90 Series Modular StrainersList Price
Sediment BucketsList Price
Floor Sink PartsList Price
Roof Drain PartsList Price
Cleanout PartsList Price
Interceptor PartsList Price
Fixture Carrier Parts and Trim KitsList Price

Autocad Drawing
Hydrant Parts and BoxesList Price