MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > Interceptors  > SUPER-2000-O - SUPERMAX® GRAVITY OIL INTERCEPTOR - 2000 GALLONS LIQUID HOLDING CAPACITY
SUPER-2000-O - SUPERMAX® GRAVITY OIL INTERCEPTOR - 2000 GALLONS LIQUID HOLDING CAPACITY

SUPER-2000-O - SUPERMAX® GRAVITY OIL INTERCEPTOR - 2000 GALLONS LIQUID HOLDING CAPACITY

Specification Sheet Click for downloads List Price 

Specification: MIFAB® SUPER-2000-O gravity oil interceptor with 2000 U.S. gallons of liquid holding capacity has a limited lifetime warranty and is made in the U.S.A. out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor is designed for above or below ground installation and includes and adjustable lid system, sample port access, internal baffle, deep seal trap covered by lid, internal air relief by-pass, adjustable oil draw-off assembly ( 1 ½” I.P.S.) on each side, double vent connections (3” I.P.S.) on each side, stainless steel calibrated orifice plate (internal flow control), base for support and floor level installation and 4” no hub inlet and outlet connections. Steel encased composite lids provide a water / gas tight seal and have a minimum of 20,000 LB. load capacity – in accordance with the loading requirements of AASHTO H20. The high density polyethylene material is PE 3135 from Dow 9.39 with a density of 0.939 g/cm3.

Function: Oil interceptors are required anywhere oil and sand may be introduced to the public sewer system in applications such as: repair garages, oil change stations, car wash facilities, parking garages, parking lots, hydraulic elevator pits and facilities where oil and flammable liquid waste are produced as a result of manufacturing, storage, maintenance, repair or testing processes. The interceptor collects the oil before it is drained to an adjacent storage tank through an adjustable draw off system. Typically installed either on or into the floor. Regular maintenance is required to keep the interceptor functioning. All SuperMax gravity interceptors can withstand a temperature of up to and including 180 degrees Fahrenheit.

 

Specifications
No. of Lids

Note
Item Name

Series

MIFAB Design
Maintenance & General Considerations
Sizing
Fixture Unit Sizing Method
Capacity

Disposition of Intercepted Materials
Grease Interceptors
Gallons Per Minute [Flow Rate]

Cleaning
Dimensional Drawing
File Not Found
Dimension F
Dimension E
Dimension D
Dimension C

No. of Bolts

Operation
Dimension B
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com