Specification: MIFAB® Series T2170, 17" wide, 80" long, pre-sloped (1.00% built in slope) or neutral trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has anchor tabs to secure the body within the concrete pour. Slotted tabs are located on both sides of the body for # 5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 4", 6", 8", 10" or 12" no hub outlet connections and are fabricated as part of the trench drain system. Grates are bolted to brackets within the body. Class C and F grates are available with H-20 and/or FAA load ratings and/or ADA compliancewith grate lockdown hardware (see page 29). End caps and catch basins are also available.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The lightweight and acid resistant coated steel body provides for long life. The standard heavy duty angle iron framesupplied with all bodies provides for maximum load bearing capability. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available.