-
Specification: MIFAB® Series T250, 2 ½” wide, 3” deep, 40” long (or length as needed), non sloped trench drain system. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has tabs for # 5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 2” no hub outlet connections and fabricated as part of the trench drain system. 20” long polypropylene grates are provided as standard (Suffix –HPP) along with grate lockdown hardware for each grate to secure to the body.
Function: Used around residential and landscaped areas that require surface drainage in shallow (only 3” deep) excavations. The lightweight acid resistant powder epoxy coated steel body provides for long life. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. Aluminum wire grates (Suffix –AWG), Stainless Steel wire grates (Suffix –SSWG) and Stainless Steel decorative grates (Suffix –SSDA) are also available -
Specification: MIFAB® Series T275, 4 3/4” wide, 2 ¾” deep, 40” long, non sloped trench drain system. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has slotted tabs on both sides of the body, 10” apart, for rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 2” or 3” no hub outlet connections and are fabricated as part of the trench drain system. 20” long polypropylene grates are provided as standard (Suffix –HPP) along with grate lockdown hardware for each grate to secure to the body. Class A and E grates are also available with H-20 and / or ADA compliance. End caps and catch basins are also available.
Function:Used around residential, kitchen and sidewalk areas that require surface drainage in shallow (only 2 ¾” deep) excavations. The lightweight acid resistant powder epoxy coated steel body provides for long life. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB® Series T300, 6" wide, 2 7/8" deep, 39.40" long, non sloped trench drain system. Body is manufactured from polypropylene. Each body has tabs on both sides of the body, for rebar tie down and leveling. Bodies have interlocking ends and a radiused bottom. End outlets are available in 2" no hub outlet connections and bottom outlets are available in 3" or 4" no hub outlet connections. 20" long polypropylene grates are provided as standard (Suffix -HPP) along with grate lockdown hardware for each grate to secure to the body. Class A, B and C grates are also available with H-20 and / or ADA compliance. End caps and catch basins are also available.
Function: Used around pools, residential areas, multi family, kitchen, driveways and sidewalk areas that require surface drainage in shallow (only 2 7/8" deep) excavations. The lightweight and chemical resistant polypropylene body provides for long life. An infinite number of body sections can be assembled together to serve any requirement. -
-
-
MIFAB Series T1150-F - 12" (305) wide x (specify length) long ductile iron trench drain grate with angle iron frame. Grates to have maximum 3/8" (10) openings. Supply in sections as indicated on drawings.
-
MIFAB Series T1200-F-4 12" wide steel frame and grate system. Lacquered 1 7/8" x 1 7/8" x 1/4" welded angle iron steel frame with anchor tabs located every 20" for anchoring support. Standard 24" long, ANSI rated "Special Duty" lacquered ductile iron heel proof grates with a safe live load of over 10,000 lbs.
-
MIFAB Series T1200-F2-4 24" wide steel frame and grate system. Lacquered 1-7/8" x 1-7/8" x 1/4" welded angle iron steel frame with anchor tabs located every 20" for anchoring support. Standard 12" long ANSI rated "Special Duty" lacquered ductile iron heel proof grates with a safe live load of over 10,000 lbs.
-
Specification: MIFAB® Series T1320-FL, 6" wide, 6 3/4" deep, 20" long, non sloped modular trench drain with lacquered cast iron body sections. Each body has a 2" wide anchor flange cast into each side recessed 2.20" down from the top. Bodies have a radiused bottom and flanged ends to connect to each other with a neoprene rubber gasket in between. End outlets are available in 2", 3" or 4" no hub outlet connections (specify outlet connection size) and bottom outlets are available in 2", 3", or 4" no hub outlet connections (specify outlet connection size). 20" long, Class E, H-20 ductile iron grate is provided as standard (Suffix -4) along with grate lockdown hardware for each grate to secure to the body. Class A, B, C and D grates are also available. End caps and catch basins are also available.
Function: Used in vehicle washdown areas, loading and parking areas, at the bottom of parking garages, warehouses and other locations that have heavy vehicle traffic. An infinite number of body sections can be assembled together to serve any requirement. -
Specification: MIFAB® Series T1330-FL-FAB, 6" wide, 40" long, pre-sloped (1/8" per foot) modular trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has a 3" wide anchor flange on each side recessed 2 3/4" down from the top. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 2", 3" or 4" no hub outlet connections and are fabricated as part of the trench drain system. 20" long, Class E, H-20 ductile iron grates are provided as standard (Suffix ?4) along with grate lockdown hardware for each grate to secure to the body. Class A, B, C and D grates are also available. End caps and catch basins are also available.
Function: Used in precast construction pours. Extra wide 3" anchor flange is designed to install over precast concrete slabs. Standard 2 3/4" depth from the anchor flange to the top of the drain allows for concrete to secure the drain system within the slab. -
Specification: MIFAB® Series T1330-FL-FAB, 6" wide, 40" long, pre-sloped (1/8" per foot) modular trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has a 3" wide anchor flange on each side recessed 2 3/4" down from the top. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 2", 3" or 4" no hub outlet connections and are fabricated as part of the trench drain system. 20" long, Class E, H-20 ductile iron grates are provided as standard (Suffix -4) along with grate lockdown hardware for each grate to secure to the body. Class A, B, C and D grates are also available. End caps and catch basins are also available.
Function: Used in precast construction pours. Extra wide 3" anchor flange is designed to install over precast concrete slabs. Standard 2 3/4" depth from the anchor flange to the top of the drain allows for concrete to secure the drain system within theslab. -
Specification: MIFAB® Series T1350-FL, 12" wide, 7 3/4" deep, 12" long, non sloped modular trench drain with lacquered cast iron body sections. Each body has a 2" wide anchor flange cast into each side recessed 2" down from the top. Bodies have a radiused bottom and flanged ends to connect to each other with a neoprene rubber gasket in between. End outlets are available in 2", 3", 4" or 6" no hub outlet connections (specify outlet connection size) and bottom outlets are available in 2", 3", 4" or 6" no hub outlet connections (specify outlet connection size). 12" long, Class E, H-20 ductile iron grates are provided as standard (Suffix ?4). End caps and catch basins are also available.
Function: Used in vehicle washdown areas, loading and parking areas, at the bottom of parking garages, warehouses and other locations that have heavy vehicle traffic. An infinite number of body sections can be assembled together to serve any requirement. Can also be used in small sections as an area drain. -
Specification: MIFAB® Series T1360-FL-FAB, 12" wide, 36" long, pre-sloped (1/8" per foot) modular trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has a 3" wide anchor flange on each side recessed 2 3/4" down from the top. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 2", 3", 4" or 6" no hub outlet connections and are fabricated as part of the trench drain system. 12" long, Class E, H-20 ductile iron grates are provided as standard (Suffix ?4). End caps and catch basins are also available.
Function: Used in precast construction pours. Extra wide 3" anchor flange is designed to install over precast concrete slabs. Standard 2 3/4" depth from the anchor flange to the top of the drain allows for concrete to secure the drain system within the slab. -
Specification: MIFAB® Series T1360-FL-FAB-TH, 12" wide, 36" long, pre-sloped (1/8" per foot) modular trench drain with "V" shaped bottom. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has a 3" wide anchor flange on each side recessed 2 3/4" down from the top with one side sloped to position on top of the precast concrete slab adjoining the drain (Specify this dimension). Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 2", 3", 4" or 6" no hub outlet connections and are fabricated as part of the trench drain system. 12" long, Class E, H-20 ductile iron grates are provided as standard (Suffix -4). End caps and catch basins are also available.
Function: Used in prefabricated parking garages where the sloped and horizontal precast construction sections meet. Extra wide 3" anchor flange is designed to install over precast concrete slabs. 2 3/4" depth from the anchor flange to the top of the drain allows for concrete to secure the drain system within the slab. -
Specification: MIFAB Series T1400 6” wide pre-sloped trench drain system. Polypropylene drain body with integral top frame and 1/4" per section bottom slope, anchor flange with slotted tabs every 10” for rebar tie down and leveling, grate lockdown assembly, body support legs, interlocking ends, and radiused bottom. Standard with ANSI rated “Special Duty” lacquered ductile iron grates with a safe live load of over 10,000 lbs. (Note: Specify ductile iron frames for forklift applications.)
Function: Used in airports, car washes, malls and plazas, golf courses, factories, and any other facilities that require large areas of surface drainage. Chemical resistant polypropylene material provides for long life. V configuration channel design ensures maximum flow of water. Polypropylene support board prevents debris from entering trench body during construction. -
Part Number Configurator
Specification: MIFAB® Series T1400-CB620 6" wide x 20" long x 21" deep catch basin. Polypropylene body with integral top frame, anchor flange, grate lockdown assembly, interlocking ends, and radiused bottom. Standard with ANSI rated "Special Duty" lacquered ductile iron heel proof grates with a safe live load of over 10,000 lbs.
Function: Used in airports, car washes, malls and plazas, golf courses, factories, and any other facilities that require large areas of surface drainage. Typically installed in the middle of a T1400 section of trench drain to receive debris and redirect waste water. Chemical resistant polypropylene material provides for long life. -
Part Number Configurator
Specification: MIFAB® Series T1400-CB1224 12" wide x 24" long x 21" deep catch basin. Powder epoxy coated with integral top frame, anchor flange, Standard with ANSI rated "Heavy Duty" lacquered ductile iron grate with a safe live load of over 10,000 lbs.
Function: Used in airports, car washes, malls and plazas, golf courses, factories, and any other facilities that require large areas of surface drainage. Typically installed in the middle of a T1400 section of trench drain to receive debris and redirect waste water. -
Specification: MIFAB Series T1400-SD, 39.40” long, 8” deep, 4” internal body width, neutral sloped slot drain system. Body is manufactured from polypropylene. Each body has six tabs, 18” apart, for #3 rebar tie down and leveling. Bodies have flanged ends, and a radiused bottom for efficient liquid drainage. Complete with ½” wide (ADA compliant) slot opening top assembly for surface drainage. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -.250 for .” wide slot opening. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. End and bottom outlets are available in 2" no hub connections. Catch basins are also available.
Function: Used in parking lots, factories, running tracks, sports facilities, pools, landscape areas and any other facilities that require surface drainage with a narrow drainage opening for aesthetic appeal. The lightweight and chemical resistant polypropylene body provides for long life. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB Series T1400-SD, 39.40” long, 8” deep, 4” internal body width, neutral sloped slot drain system. Body is manufactured from polypropylene. Each body has six tabs, 18” apart, for #3 rebar tie down and leveling. Bodies have flanged ends, and a radiused bottom for efficient liquid drainage. Complete with ½” wide (ADA compliant) slot opening top assembly for surface drainage. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -.250 for .” wide slot opening. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. End and bottom outlets are available in 2” no hub connections. Catch basins are also available.
Function: Used in parking lots, factories, running tracks, sports facilities, pools, landscape areas and any other facilities that require surface drainage with a narrow drainage opening for aesthetic appeal. The lightweight and chemical resistant polypropylene body provides for long life. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB Series T1400-SD-12H, 39.40” long, 11 3/4” deep, 4” internal body width, neutral sloped slot drain system. Body is manufactured from polypropylene. Each body has four tabs, 20” apart, for #3 rebar tie down and leveling. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and have staggered, semi-circular cutouts on each side at the bottom to enable concrete flow underneath the body. Complete with ½” wide (ADA compliant) slot opening top assembly for surface drainage. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -.250 for .” wide slot opening. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. End and bottom outlets are available in 3” and 4” no hub outlet connections. Catch basins are also available.
Function: Used in parking lots, factories, highways, airports, ports, wineries and any other facilities that require surface drainage with a narrow drainage opening for aesthetic appeal. The lightweight and chemical resistant polypropylene body provides for long life. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available.
-
Specification: MIFAB Series T1400-SD-12H, 39.40” long, 11 3/4” deep, 4” internal body width, neutral sloped slot drain system. Body is manufactured from polypropylene. Each body has four tabs, 20” apart, for #3 rebar tie down and leveling. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and have staggered, semi-circular cutouts on each side at the bottom to enable concrete flow underneath the body. Complete with ½” wide (ADA compliant) slot opening top assembly for surface drainage. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -.250 for .” wide slot opening. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. End and bottom outlets are available in 3” and 4” no hub outlet connections. Catch basins are also available.
Function: Used in parking lots, factories, highways, airports, ports, wineries and any other facilities that require surface drainage with a narrow drainage opening for aesthetic appeal. The lightweight and chemical resistant polypropylene body provides for long life. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
T1400 Grates (4)Search:T1400 Grates - 4 Products
-
Specification: MIFAB® Series T1500, 6” wide, 39.40” long, pre-sloped (0.5%) or neutral FILCOTEN® trench drain system. Body is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends, a radiuses bottom for efficient liquid drainage and multiple anchoring ribs to securely hold the body into the concrete foundation. Each body is manufactured with an integral 4mm thick, extra heavy duty, galvanized steel rail. End and bottom outlets are available in 2”, 3” or 4” no hub outlet connections (specify outlet size). Grate options include extra heavy duty ductile iron (Load Class E) and slotted and perforated heavy duty galvanized steel (Load Class C). Grates are secured to the body with a four point self-locking system. End caps and catch basins are also available (See T1500-CB620).Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty, hard wheel traffic applications.
-
Specification: MIFAB Series T1500-CB620, 6” wide, 19.68” long x 23.62” deep FILCOTEN catch basin. Catch basin is manufactured from a fibre-reinforced concrete based material. Each catch basin is manufactured with an integral 4mm thick, extra heavy duty, galvanized steel rail and is capable of receiving body sections 0N, 5, 5N, 10 and 10N. Standard with a 4” No Hub side outlet. Grate options include extra heavy duty ductile iron grating (Load Class E) and heavy duty slotted and perforated galvanized steel (Load Class C). Grates are secured to the body with a four point self-locking system.Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the catch basin is free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the catch basin – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced concrete material. Typically installed within a T1500 section of trench drain to receive debris and redirect waste water to the underground piping. They can be placed at the end of the trench run or at any other point in the system.
-
T1500 Grates (9)Specification: : MIFAB T1500-PG-4-ADA, heavy duty, (Load Class C), longitudinal slotted ductile iron grate is 4.80” wide x 19.68” long, weighing 7.93 lbs. per linear foot. The grate has .23” wide x .90” long slots and has a free open area of 26.35 square inches. The grate is secured to the body with a four point self-locking (snap in) system. Manufactured from ductile iron material conforming to ASTM A 536-84, Grade 65-45-12.Search:T1500 Grates - 9 Products
-
Specification: MIFAB Series T1500-3, 6” wide, 39.40” long, pre-sloped (0.5%) or neutral FILCOTEN trench drain system. Body is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and multiple anchoring ribs to securely hold the body into the concrete foundation. Each body is manufactured with an integral 4mm thick, extra heavy duty, stainless steel rail. End and bottom outlets are available in 2”, 3” or 4” no hub outlet connections (specify outlet size). Grate options include heavy duty slotted and perforated stainless steel (Load Class C). Grates are secured to the body with a four point self-locking system. End caps and catch basins are also available (See T1500-3-CB620).Function: Used in residential and commercial areas such as showers, shopping malls, showrooms, food and pharmaceutical facilities, plazas and other areas that require an architectural finish. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant concrete material.
-
T1500-3 Grates (5)Search:T1500-3 Grates - 5 Products
-
Specification: MIFAB® Series T1500-BRS, 39 3/8” long, neutral sloped brick slot drain system. Body is manufactured from fibre re-inforced concrete. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and multiple anchoring ribs to securely hold the body into the concrete foundation. Each body is manufactured with an integral 4mm thick, extra heavy duty, galvanized steel rail. End and bottom outlets are available in 2”, 3” or 4” no hub outlet connections (specify outlet size). Complete with 3/8” wide (ADA compliant) brick slot opening top assembly for surface drainage. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -.250 for ¼” wide slot opening. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. Catch basins are also available.
Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths where the typical gate design is not desired. The 3/8” narrow slot opening provides a discreet and architecturally pleasing drainage opening for surface water. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant concrete material. -
Specification: MIFAB Series T1500-3-CB620, 6” wide, 19.68” long x 23.62” deep FILCOTEN catch basin. Catch basin is manufactured from a fibre-reinforced concrete based material. Each catch basin is manufactured with an integral 4mm thick, extra heavy duty, stainless steel rail and is capable of receiving body sections 0N-3, 5-3, 5N-3, 10-3 and 10N-3 . Standard with a 4” No Hub side outlet. Grate options include heavy duty slotted and perforated stainless steel (Load Class C). Grates are secured to the body with a four point self-locking system.
Function: Used in residential and commercial areas such as showers, shopping malls, showrooms, food and pharmaceutical facilities, plazas and other areas that require an architectural finish. Ideal for environmentally sensitive areas because the catch basin is free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the catch basin – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced concrete material. Typically installed within a T1500-3 section of trench drain to receive debris and redirect waste water to the underground piping. They can be placed at the end of the trench run or at any other point in the system. -
Specification: MIFAB® Series T1560, 6” wide, 39.40” long, neutral FILCOTEN® trench drain system. Body is only 2.36” deep and is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends and a flat bottom for efficient liquid drainage.Each body is manufactured with an integral 4mm thick, extra heavy duty, galvanized steel rail. End and bottom outlets are available in 2”, 3” or 4” no hub outlet connections (specify outlet size). Grate options include extra heavy duty ductile iron (Load Class E) and slotted and perforated heavy duty galvanized steel (Load Class C). Grates are secured to the body with a four point self-locking system. End caps and catch basins are also available (See T1500-CB620).
Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty, hard wheel traffic applications. -
Specification: MIFAB® Series T1560-3, 6" wide, 39.40" long, neutral FILCOTEN® trench drain system. Body is only 2.36" deep and is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends and a flat bottom for efficient liquid drainage.Each body is manufactured with an integral 4mm thick, extra heavy duty stainless steel rail. End and bottom outlets are available in 2", 3" or 4" no hub outlet connections (specify outlet size). Grate options include slotted and perforated stainless steel (Load Class C). Grates are secured to the body with a four point self-locking system. End caps and catch basins are also available (See T1500-3-CB620).
Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels ? resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty,hard wheel traffic applications. -
Specification: MIFAB Series T1700-3, 8” wide, 39.40” long, pre-sloped (0.5%) or neutral FILCOTEN trench drain system. Body is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and multiple anchoring ribs to securely hold the body into the concrete foundation. Each body is manufactured with an integral 4mm thick, extra heavy duty, stainless steel rail. End and bottom outlets are available in 2”, 3”, 4”, 6”, or 8” no hub outlet connections (specify outlet size). The grate provided heavy duty perforated stainless steel (Load Class C). Grates are secured to the body with a four point self-locking system. End caps and catch basins are also available (See T1700-3-CB750).
>
Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant and non flammable concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty, hard wheel traffic applications. -
Specification: MIFAB® Series T1700, 8” wide, 39.40” long, pre-sloped (0.5%) or neutral FILCOTEN® trench drain system. Body is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and multiple anchoring ribs to securely hold the body into the concrete foundation. Each body is manufactured with an integral 4mm thick, extra heavy duty, galvanized steel rail. End and bottom outlets are available in 2”, 3”, 4”, 6” or 8” no hub outlet connections (specify outlet size). The grates are extra heavy duty ductile iron (Load Class E). Grates are secured to the body with a four point self-locking system. End caps and catch basins are also available (See T1700-CB750).Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant and non flammable concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty, hard wheel traffic applications.
-
Specification: MIFAB® Series T1700-CB820, 8” wide, 19.68” x 29.53” deep, FILCOTEN® catch basin. Body is manufactured from a fibre-reinforced concrete based material. Each catch basin is manufactured with an integral 4mm thick, extra heavy duty, galvanized steel rail. The grates are extra heavy duty ductile iron (Load Class E). Grates are secured to the body with a four point self-locking system.
Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant and non flammable concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty, hard wheel traffic applications. -
Specification: MIFAB® Series T1800, 12” wide, 39.40” long, stepped slope or neutral FILCOTEN® trench drain system. Body is manufactured from a fibre-reinforced concrete based material. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and multiple anchoring ribs to securely hold the body into the concrete foundation. Each body is manufactured with an integral 5mm thick, extra heavy duty, cast iron rail. End and bottom outlets are available in 2”, 3”, 4”, 6”, 8”, 10” or 12” no hub outlet connections (specify outlet size). The grate provided is an extra heavy duty ductile iron (Load Class E) grate. Grates are secured to the body with four bolts per grate. End caps and catch basins are also available (See T1800-CB950).Function: Used in commercial areas such as factories, warehouses, parking garages, car dealerships, gas stations, public and residential areas, parks, sports complexes, town squares, railway stations and cycle and foot paths. Ideal for environmentally sensitive areas because the body channels are free of resins, heavy metals, VOC and all chemicals. Exceptional adhesion to surrounding concrete foundation due to the concrete composition of the body channels – resulting in a monolithic all concrete installation. Less breakage during transport and installation due to impact resistant, fibre-reinforced, UV resistant and non flammable concrete material. Extra heavy duty integral galvanized steel rail allows for heavy duty, hard wheel traffic applications.
-
Part Number Configurator
Specification: MIFAB® T2000 Series 12" wide pre-sloped trench drain system. Polypropolene drain body with integral top frame and 0.5% per section bottom slope, anchor flange with slotted tabs every 15.5" for rebar tie down and leveling, grate lockdown assembly, body support system, interlocking ends and radiused bottom. Standard with ANSI rated "Special Duty" lacquered ductile iron grates and a galvanized steel frame with a safe live load of over 10,000 lbs.
Function: Used in airports, car washes, malls and plazas, golf courses, factories and any other facilities that require large areas of surface drainage. Chemical resistant polypropolene material provides for long life. -
Specification: MIFAB® T2000 Series 12" wide pre-sloped trench drain system. Polypropolene drain body with integral top frame and 0.5% per section bottom slope, anchor flange with slotted tabs every 15.5" for rebar tie down and leveling, grate lockdown assembly, body support system, interlocking ends and radiused bottom. Standard with ANSI rated "Special Duty" lacquered ductile iron grates and a galvanized steel frame with a safe live load of over 10,000 lbs.
Function: Used in airports, car washes, malls and plazas, golf courses, factories and any other facilities that require large areas of surface drainage. Chemical resistant polypropolene material provides for long life.
-
Specification: MIFAB Series T2000-CB1224, 12” wide, 20” long x 20” deep catch basin. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has four tabs for #5 rebar tie down and leveling. End outlets are available in 3', 4”, 6” and 8” no hub outlet connections and are fabricated as part of the catch basin. Grate options include ductile iron, galvanized steel, stainless steel and plastic along with grate lockdown hardware for each grate to secure to the body. These grates are available in Class A, B, C, D and E along with ADA and FAA compliance.
Function: Used inline to maintain a visual appearance of a continuous trench drain installation. Catch basins serve to collectdebris and redirect waste water. The T2000-CB1224 is typically installed between two sections of T2000 Series of trench drain
although they can be modified to accept all other Series of MIFAB trench drain systems.
-
Specification: MIFAB Series T2000-SD-21H, 39.40” long, 21” deep, 9.70” internal body width, neutral sloped slot drain system. Body is manufactured from polypropylene. Each body has six tabs for #5 rebar tie down and leveling. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and have staggered, semi-circular cutouts on each side at the bottom to enable concrete flow underneath the body. Complete with a 1 3/4” wide slot opening top assembly that has spacer bars at 5” intervals to keep the sides of the slot apart. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. Specify -HD for a fabricated heavy duty steel slot opening top assembly for dynamic loads. End and bottom outlets are available in 4” and 6” no hub outlet connections. Catch basins are also available.
Function: Used in parking lots, factories, highways, airports, ports, wineries and any other facilities that require surface drainage with a narrow drainage opening for aesthetic appeal. The lightweight and chemical resistant polypropylene body provides for long life. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB Series T2000-CB2424, 24” wide x 24” long x 20” deep catch basin. Body is manufactured from 16 gauge steel and finished with an acid resistant powder epoxy coating. Each body has six tabs for #3 rebar tie down and level- ing. Bodies have flanged ends to connect to the trench drain bodies with a neoprene rubber gasket in between. A heavy duty angle iron frame is supplied with all body sections for all grates to secure to. Grates options include ductile iron, galvanized steel, stainless steel and plastic along with grate lockdown hardware for each grate to secure to the body. These grates are available in Class A, B, C, D and E along with ADA compliance.
Function: Used inline to maintain a visual appearance of a continuous trench drain installation. Catch basins serve to collect debris and redirect waste water. The T2000-CB2424 is typically installed between two sections of T2000 Series of trench drain although they can be modified to accept all other Series of MIFAB trench drain systems. -
Specification: MIFAB Series T2000-SD-31H, 39.40” long, 31” deep, 23” internal body width, neutral sloped slot drain system. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has six tabs for #5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene gasket in between. Complete with a 1 3/4” wide slot opening top assembly that has spacer bars at 5” intervals to keep the sides of the slot apart. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. Specify -HD for a fabricated heavy duty steel slot opening top assembly for dynamic loads. End and bottom outlets are available in 4” and 6” no hub outlet connections and are fabricated as part of the slot drain system. Catch basins are also available.
Function: Used in parking lots, factories, highways, airports, ports, wineries and any other facilities that require surface drainage with a narrow drainage opening for aesthetic appeal. The lightweight and chemical resistant polypropylene body provides for long life. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB Series T2000-SD-CO, 39.40” long, 12” wide and 14 1/4” deep slot drain with cleanout port. Body is manufactured from polypropylene. Each body has three tabs for #5 rebar tie down and leveling. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and have staggered, semi-circular cutouts on each side at the bottom to enable concrete flow underneath the body. Grates are 6” wide and available in ductile iron, galvanized steel, stainless steel and plastic along with grate lockdown hardware for each grate to secure to the body. These grates are available in Class A, B, C, D and E along with ADA compliance. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. Specify -HD for a fabricated heavy duty steel slot opening top assembly for dynamic loads. End and bottom outlets are available in 4” or 6” no hub outlet connections. Catch basins are also available.
Function: Used inline with the T2000-SD slot drain Series to maintain a visual appearance of a continuous trench drain installation while providing a cleanout port for accumulated debris. -
Specification: MIFAB Series T2000-SD-21H-CO, 39.40” long, 12” wide and 21” deep slot drain with cleanout port. Body is manufactured from polypropylene. Each body has three tabs for #5 rebar tie down and leveling. Bodies have interlocking ends, a radiused bottom for efficient liquid drainage and have staggered, semi-circular cutouts on each side at the bottom to enable concrete flow underneath the body. Grates are 6” wide and available in ductile iron, galvanized steel, stainless steel and plastic along with grate lockdown hardware for each grate to secure to the body. These grates are available in Class A, B, C, D and E along with ADA compliance. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. Specify -HD for a fabricated heavy duty steel slot opening top assembly for dynamic loads. End and bottom outlets are available in 4” and 6” no hub outlet connections. Catch basins are also available.
Function: Used inline with the T2000-SD slot drain Series to maintain a visual appearance of a continuous trench drain installation while providing a cleanout port for accumulated debris. -
Specification: MIFAB Series T2000-SD-31H-CO, 39.40” long, 24” wide and 31” deep slot drain cleanout port. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has three tabs for #5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene gasket in between. Grates are 6” wide and available in ductile iron, galvanized steel, stainless steel and plastic along with grate lockdown hardware for each grate to secure to the body. These grates are available in Class A, B, C, D and E along with ADA compliance. The slot opening top assembly is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Specify -3 for a fabricated Type 304 stainless steel slot opening top assembly. Specify -HD for a fabricated heavy duty steel slot opening top assembly for dynamic loads. End and bottom outlets are available in 4” and 6” no hub outlet connections and are fabricated as part of the slot drain system. Catch basins are also available.
Function: Used inline with the T2000-SD slot drain Series to maintain a visual appearance of a continuous trench drain installation while providing a cleanout port for accumulated debris. -
Specification: MIFAB® Series T2170, 17" wide, 80" long, pre-sloped (1.00% built in slope) or neutral trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has anchor tabs to secure the body within the concrete pour. Slotted tabs are located on both sides of the body for # 5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 4", 6", 8", 10" or 12" no hub outlet connections and are fabricated as part of the trench drain system. Grates are bolted to brackets within the body. Class C and F grates are available with H-20 and/or FAA load ratings and/or ADA compliancewith grate lockdown hardware (see page 29). End caps and catch basins are also available.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The lightweight and acid resistant coated steel body provides for long life. The standard heavy duty angle iron framesupplied with all bodies provides for maximum load bearing capability. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB® Series T2170, 17" wide, 80" long, pre-sloped (1.00% built in slope) or neutral trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has anchor tabs to secure the body within the concrete pour. Slotted tabs are located on both sides of the body for # 5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 4", 6", 8", 10" or 12" no hub outlet connections and are fabricated as part of the trench drain system. Grates are bolted to brackets within the body. Class C and F grates are available with H-20 and/or FAA load ratings and/or ADA compliancewith grate lockdown hardware (see page 29). End caps and catch basins are also available.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The lightweight and acid resistant coated steel body provides for long life. The standard heavy duty angle iron framesupplied with all bodies provides for maximum load bearing capability. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB® Series T2400, 24” wide, 80” long, pre-sloped (1.00% built in slope) or neutral trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has anchor tabs to secure the body within the concrete pour. Slotted tabs are located on both sides of the body for # 5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 4”, 6”, 8”, 10”, 12” or 18” no hub outlet connections and are fabricated as part of the trench drain system. Grates are bolted to brackets within the body. Class C and F grates are available with H-20 and/or FAA load ratings and/or ADA compliance with grate lockdown hardware. End caps and catch basins are also available.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The lightweight and acid resistant coated steel body provides for long life. The standard heavy duty angle iron frame supplied with all bodies provides for maximum load bearing capability. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB® Series T2400-F, 24” wide frame and grate system available in 12" long increments with a heavy duty angle iron frame assembly (1 3/4” x 1 3/4” x 1.875”) for all grates to secure to and finished with an acid resistant powder epoxy coating. Each 12” long section has two 1” x 3” long anchor tabs / leveling devices for securing into the surrounding concrete. Complete with MIFAB's standard ductile iron grate. Load Class F.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The standard heavy duty angle iron frame provides for maximum load bearing capability. No body is provided as the channel is typically formed into the concrete by the installer. An infinite number of sections can be assembled together to serve any requirement. -
Specification: MIFAB® Series T2600, 26” wide, 80” long, pre-sloped (1.00% built in slope) or neutral trench drain. Body is manufactured from 14 gauge steel and finished with an acid resistant powder epoxy coating. Each body has anchor tabs to secure the body within the concrete pour. Slotted tabs are located on both sides of the body for # 5 rebar tie down and leveling. Bodies have flanged ends to connect to each other with a neoprene rubber gasket in between. End and bottom outlets are available in 4”, 6”, 8”, 10”, 12” or 18” no hub outlet connections and are fabricated as part of the trench drain system. Grates are bolted to brackets within the body. Class C and F grates are available with H-20 and/or FAA load ratings and/or ADA compliance with grate lockdown hardware. End caps and catch basins are also available.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The lightweight and acid resistant coated steel body provides for long life. The standard heavy duty angle iron frame supplied with all bodies provides for maximum load bearing capability. Water resistant sealant recommended between sections for indoor installations. An infinite number of body sections can be assembled together to serve any requirement. 45 and 90 degree body sections are available. -
Specification: MIFAB Series T2600-F, 26” wide, frame and grate system available in 12” long increments with a heavy duty angle iron frame assembly (1 3/4” x 2 3/4” x 1.875”) for all grates to secure to and finished with an acid resistant powder epoxy coating. Each 12” long section has two 1” x 3” long anchor tabs / leveling devices for securing into the surrounding concrete. Complete with MIFAB's standard ductile iron grate. Load class C.
Function: Used in airports, car washes, malls, parking lots, factories and any other facilities that require large areas of surface drainage. The standard heavy duty angle iron frame provides for maximum load bearing capability. No body is provided as the channel is typically formed into the concrete by the installer. An infinite number of sections can be assembled together to
-
17 Inch Wide Grates Various Designs TD 2015(PDF, 92KB)
-
24 Inch Wide Grates Various Designs TD 2015(PDF, 92KB)
-
26 Inch Wide Grates Various Designs TD 2015(PDF, 160KB)
-
-
-
Cross Reference Guide TD 2015(PDF, 46KB)
-
FILCOTEN 2017(XLSX, 18KB)
-
FILCOTEN 2017 Catalog And Price Book(PDF, 17MB)
-
FILCOTEN 2017 Catalog And Price Book(PDF, 165KB)
-
Filcoten Competitive Product Matrix(XLSX, 726KB)
-
Filcoten Fire Resistance Report(PDF, 456KB)
-
FILCOTEN Product Features And Benefits FILCOTEN 2015(PDF, 274KB)
-
Filcoten T1500 PowerPoint(PDF, 2MB)
-
-
-
Grate Load Class Definitions TDSS 2016(PDF, 163KB)
-
MI G SDH INSTALLATION AND MAINTENANCE(PDF, 44KB)
-
Neutral Sloped Vs. Sloped Trench Drain Layout(PDF, 128KB)
-
Outlet Selection Guide(PDF, 167KB)
-
Outlet Selection Guide 2017(PDF, 195KB)
-
-
Slim Trench Order Form - USA(PDF, 3MB)
-
T1000 List Price(PDF, 58KB)
-
T1000 Specsheet(PDF, 180KB)
-
T1100-F Specsheet(PDF, 761KB)
-
T1100 List Price(PDF, 60KB)
-
T1150-(F) List Price(PDF, 61KB)
-
T1150-F Specsheet(PDF, 311KB)
-
T1200-F2 List Price(PDF, 60KB)
-
T1200-F2 Specsheet(PDF, 262KB)
-
T1200-(F) List Price(PDF, 61KB)
-
T1200-F Specsheet(PDF, 557KB)
-
T1320-FL List Price(PDF, 67KB)
-
T1320-FL Specification Sheet(PDF, 327KB)
-
T1330-FL-FAB LIST PRICES(PDF, 101KB)
-
T1330-FL-FAB Specsheet(PDF, 532KB)
-
T1330-FL-FAB-TH LIST PRICES(PDF, 100KB)
-
T1330-FL-FAB-TH Specsheet(PDF, 491KB)
-
T1350-FL List Price(PDF, 66KB)
-
T1350-FL Specification Sheet(PDF, 615KB)
-
T1360 FL FAB LIST PRICES(PDF, 96KB)
-
T1360-FL-FAB Specsheet(PDF, 695KB)
-
T1360 FL FAB TH LIST PRICES(PDF, 97KB)
-
T1360-FL-FAB-TH Specsheet(PDF, 604KB)
-
T1400-CB1224 LIST PRICES(PDF, 238KB)
-
T1400-CB1224 Specsheet(PDF, 191KB)
-
T1400-CB620 LIST PRICES(PDF, 74KB)
-
T1400-CB620 Specsheet(PDF, 450KB)
-
T1400 Chemical Resistance Chart(PDF, 351KB)
-
-
T1400 Grates Specification Sheet(PDF, 40KB)
-
T1400 Installation Guide(PDF, 2MB)
-
T1400 List Prices(PDF, 300KB)
-
T1400 LIST PRICES(PDF, 102KB)
-
T1400 Order Guide TD 2015(PDF, 60KB)
-
T1400 Order Guide TD 2015(PDF, 60KB)
-
T1400-SD-12H List Price(PDF, 85KB)
-
T1400-SD-12H Specsheet(PDF, 356KB)
-
T1400-SD-18H List Price(PDF, 85KB)
-
T1400-SD-18H Specsheet(PDF, 344KB)
-
T1400-SD-BRS List Price(PDF, 90KB)
-
T1400-SD-BRS Specsheet(PDF, 295KB)
-
T1400-SD List Price(PDF, 88KB)
-
T1400-SD Specsheet(PDF, 243KB)
-
T1400 Specsheet(PDF, 725KB)
-
T1400 T6 Specsheet(PDF, 293KB)
-
T1400-T7 Specsheet(PDF, 234KB)
-
T1400 Trench Drain Submittal Package(DOC, 1MB)
-
T1500-3-CB620 Specsheet(PDF, 290KB)
-
T1500-3 LIST PRICES(PDF, 107KB)
-
T1500-3 Specsheet(PDF, 787KB)
-
T1500-BRS LIST PRICES(PDF, 168KB)
-
T1500-BRS Specsheet(PDF, 471KB)
-
T1500-CB620 List Prices(PDF, 67KB)
-
T1500-CB620 Specsheet(PDF, 317KB)
-
-
T1500 Gratings LIST PRICES(PDF, 69KB)
-
T1500 Installation Guide(PDF, 6MB)
-
T1500-LIST PRICES(PDF, 111KB)
-
T1500 Outlets And Accessories FILCOTEN 2015(PDF, 111KB)
-
T1500-pg-4-ada Specification Sheet(PDF, 606KB)
-
T1500-PG-4 CAD DETAILS(PDF, 649KB)
-
T1500-PG-FMC-500(PDF, 508KB)
-
T1500-PG-FMC Specification Sheet(PDF, 425KB)
-
T1500-PG-FPC 500 CAD DETAILS(PDF, 307KB)
-
T1500-PG-FPC-500 Specification Sheet(PDF, 448KB)
-
T1500-PG-FPC CAD DETAILS(PDF, 182KB)
-
T1500-PG-FPC Specification Sheet(PDF, 568KB)
-
T1500-PG-FSC-500 CAD DETAILS(PDF, 176KB)
-
T1500-PG-FSC-500 Specification Sheet(PDF, 453KB)
-
T1500-PG-FSC CAD DETAILS(PDF, 387KB)
-
T1500-PG-FSC Specification Sheet(PDF, 503KB)
-
T1500-PG-FSPC(JPG, 120KB)
-
T1500-PG-FSPC-500 CAD DETAILS(PDF, 167KB)
-
T1500-PG-FSPC-500 Specification Sheet(PDF, 440KB)
-
T1500-PG-FSPC CAD DETAILS(PDF, 180KB)
-
T1500-PG-FSPC Specification Sheet(PDF, 546KB)
-
T1500-PG-FSSC-500 CAD DETAILS(PDF, 182KB)
-
T1500-PG-FSSC-500 Specification Sheet(PDF, 470KB)
-
T1500-PG-FSSC CAD DETAILS(PDF, 189KB)
-
T1500-PG-FSSC Specification Sheet(PDF, 519KB)
-
T1500 Specsheet(PDF, 717KB)
-
T1500/T1500-3 GRATE CAD DETAILS(ZIP, 1MB)
-
T1560-3 Specsheet(PDF, 751KB)
-
T1560 List Prices(PDF, 80KB)
-
T1560 Specsheet(PDF, 1MB)
-
T1700-3 Specsheet(PDF, 406KB)
-
T1700-CB820 Specsheet(PDF, 368KB)
-
-
T1700_Gratings LIST PRICES(PDF, 87KB)
-
T1700 List Prices(PDF, 92KB)
-
T1700 Outlets And Accessories FILCOTEN 2015(PDF, 142KB)
-
T1700 Specsheet(PDF, 423KB)
-
-
T1800_Gratings LIST PRICES(PDF, 64KB)
-
T1800 List Prices(PDF, 91KB)
-
T1800 Outlets And Accessories FILCOTEN 2015(PDF, 227KB)
-
T1800 Specsheet(PDF, 519KB)
-
T2000-CB1224 List Prices(PDF, 70KB)
-
T2000-CB1224 Specsheet(PDF, 287KB)
-
T2000-CB2424 LIST PRICES(PDF, 71KB)
-
T2000-CB2424 Specsheet(PDF, 393KB)
-
T2000 Installation Guide(PDF, 1MB)
-
T2000 LIST PRICES(PDF, 76KB)
-
T2000 Order Guide TD 2015(PDF, 59KB)
-
T2000 Product Installation Guide TD 2015(PDF, 393KB)
-
T2000 Product Installation Guide TD 2015(PDF, 393KB)
-
T2000-SD-21H-CO List Price(PDF, 88KB)
-
T2000-SD-21H-CO Specsheet(PDF, 414KB)
-
T2000-SD-21H List Price(PDF, 86KB)
-
T2000-SD-21H Specsheet(PDF, 384KB)
-
T2000-SD-31H-CO List Price(PDF, 87KB)
-
T2000-SD-31H-CO Specsheet(PDF, 481KB)
-
T2000-SD-31H List Price(PDF, 86KB)
-
T2000-SD-31H Specsheet(PDF, 449KB)
-
T2000-SD-CO List Price(PDF, 87KB)
-
T2000-SD-CO Specsheet(PDF, 402KB)
-
T2000-SD LIST PRICES(PDF, 85KB)
-
T2000-SD Specsheet(PDF, 270KB)
-
T2000 Specsheet(PDF, 637KB)
-
T2000 Trench Drain Submittal Package(DOC, 1MB)
-
T2170 F LIST PRICES(PDF, 94KB)
-
T2170-F Specsheet(PDF, 349KB)
-
T2170-LIST PRICES(PDF, 96KB)
-
T2170 Specsheet(PDF, 573KB)
-
T2400-F List Price(PDF, 93KB)
-
T2400-F Specsheet(PDF, 368KB)
-
T2400 List Prices(PDF, 95KB)
-
T2400 Specsheet(PDF, 584KB)
-
T250 LIST PRICE(PDF, 71KB)
-
T250 Product Image(JPG, 3MB)
-
T250 Specsheet(PDF, 528KB)
-
T2600-F LIST PRICES(PDF, 94KB)
-
T2600-F Specsheet(PDF, 387KB)
-
T2600 LIST PRICES(PDF, 96KB)
-
T2600 Specsheet(PDF, 705KB)
-
T275 Specsheet(PDF, 503KB)
-
T300 LIST PRICES(PDF, 76KB)
-
T300 Slim Trench Installation Guide(PDF, 367KB)
-
T300 Specsheet(PDF, 480KB)
-
T4000-HDSC List Price(PDF, 91KB)
-
T4000-HDSC Specsheet(PDF, 240KB)
-
T5000-158 LIST PRICES(PDF, 94KB)
-
T5000-158 Specsheet(PDF, 282KB)
-
T5000-300 List Price(PDF, 94KB)
-
T5000-300 Specsheet(PDF, 304KB)
-
TD 2015 Catalog And Price Book(PDF, 11MB)
-
TD 2015 Trench Drain Systems Price Book(PDF, 11MB)
-
TD 2017(PDF, 11MB)
-
TD 2017 Catalog effective date is June 15, 2017(PDF, 11MB)
-
TD-2017 Excel(XLSX, 35KB)
-
Term and Warranty 2019(PDF, 179KB)
-
Terms And Warranties TD 2015(PDF, 75KB)
-
Trench Drain 2017 Catalog And Price List(PDF, 11MB)
-
Trench Drain Layout Request(PDF, 28KB)
-
Trench Drain Layout Request(PDF, 28KB)
-
-
Typical Parking Deck Application TD 2015(PDF, 104KB)
-
Typical Parking Deck Application TD 2015(PDF, 104KB)