MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > No Hub Couplings
Results Per Page  
Returned 20 Results
  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:  MIFAB® Series MI-HUB (specify size) no hub couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 301 stainless steel corrugated shield. Two (2” through 4” size), four (6” through 10” size) or six (12” and 15” sizes) Type 301 stainless steel clamps tightened with 5/16” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-HUB Series Couplings are tested and certified to the ASTM-C1277-2009a, CISPI 310-2010, and CSA B602-2010 (File # 247608) Standards and are listed with IAPMO. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2-07 “Smoke Test.”


     

    Function:  Used to provide a positive and significant seal between no hub cast iron pipe and fittings.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB Series MI-XHUB (specify size) heavy duty no hub couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 304 stainless steel corrugated shield. Four (2” through 4” size), six (5” through 15” size) Type 304 stainless steel clamps tightened with 3/8” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. The MI-XHUB are tested by I.A.P.M.O. to comply to the FM1680-1989 Standard (except for markings) and CSA B602-2010 Standard (up to 10”). They are tested and certified to the ASTM C1540-2011 Standard. Per OSHPD Code Application Notice 5-311.9 revised 6/29/2011, signed by Paul Coleman; Section I (a) states that: “the use of couplings that have been tested to conform to the performance requirements of FM Approvals, Approval Standard 1680, Class I, by FM Approvals or by a nationally recognized independent testing agency” are acceptable. The MI-XHUB are also tested and certified by Intertek Testing Services to CAN / ULC S102.2-10 “Smoke Test”.

    Function: Used to provide a positive and significant seal between no hub cast iron pipe and fittings.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-EC (specify size) of flexible rubber end caps manufactured from an elastomeric compound that meets the requirements of ASTM C-564 with inside knurling for superior pipe grip and Type 300 Series of stainless steel clamp tightened with 5/16” Type 300 stainless steel hex head screw. MI-EC Series of end caps are tested and certified to I.A.P.M.O. Standard PS 90-06 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F


     

    Function: Used to cap pipe ends, cleanouts and open pipes. They are suitable for above ground or underground use on cast iron, steel, PVC or ABS pipes. .

  • Click for specsheet

    Click for downloads

    List Prices

     

     


     Specification: MIFAB® Series MI-FLEX (specify size) of flexible rubber couplings are manufactured from an elastomeric compound that meets the requirements of ASTM C-564 and 300 Series of stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws. MI-FLEX Series of flexible couplings are tested and certified to ASTM Standard 1173-2010 and CSA Standard B602-2010 and listed with I.A.P.M.O.

     

     

     Function: MI-FLEX Series of flexible rubber couplings are used to connect cast iron, plastic, steel or lead pipe to cast iron, plastic, steel or lead pipe. Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). Non constant temperature rating is 140 F.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

     


     Specification: MIFAB® Series MI-FLEX-CL (specify size) of flexible rubber couplings are manufactured from an elastomeric compound that meets the requirements of ASTM C-564 and 300 Series of stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws. The MI-FLEX-CL Series of flexible couplings are tested and certified to ASTM Standard 1173- 2010 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models and listed to the National Plumbing Code of Canada and relevent Canadian Standard(s) and bear the cUPC mark of conformity.

     

     

     Function: MIFAB's MI-FLEX-CL Series of flexible rubber couplings are used to connect clay pipe to cast iron or plastic pipe

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure) 5/16” driver required to tighten bolts.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

     


     Specification: : MIFAB® Series MI-FLEX-DTC (specify size) of flexible rubber couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws. The MI-FLEX-DTC Series of flexible couplings are tested and certified to ASTM Standard 1173-2010 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity®. Non constant temperature rating is 140 F.

     

     

     Function: MIFAB's MI-FLEX-DTC Series of flexible rubber couplings are used to connect tubular traps to common household drain pipe for new installation, repairs and alterations.

     

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure) 5/16” driver required to tighten bolts

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:: MIFAB® Series MI-HUB-TR (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. MI-HUB-TR Series of transition couplings are tested and certified to ASTM Standard 1460-2012 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity.

     

     Function: : MI-HUB-TR Series of shielded transition couplings are used to connect cast iron, plastic or steel pipe to cast iron, plastic or steel pipe. Tighten bolts to 60 inch lbs. min. / max. torque. tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). Non constant temperature rating is 140 F.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-TRC (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRC Series of shielded transition couplings are tested and certified to ASTM Standard 1460-2012 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

     Function: MIFAB's MI-HUB-TRC Series of shielded transition couplings are used to connect cast iron, plastic or steel pipe to copper or plastic pipe

     

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure) 5/16” driver required to tighten bolts.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-TRT (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRT Series of shielded transition couplings are tested and certified to ASTM Standard 1460-2012 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

     Function: MIFAB's MI-HUB-TRT Series of shielded transition couplings are used to connect cast iron, plastic or steel pipe to tubular pipe

     

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure) 5/16” driver required to tighten bolts.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-TEE (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-TEE Series of flexible tees are listed with I.A.P.M.O. Non constant temperature rating is 140 F.

     Function: MIFAB's MI-TEE Series of flexible rubber tees are used to connect common household drain, waste and vent pipes quickly. They are extra long to replace fittings cut out at the joint during a fix or alteration.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-ARC (specify size) shielded repair couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-ARC Series of shielded repair couplings are tested and certified to ASTM Standard 1173-2010 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

     Function: MIFAB's MI-HUB-ARC Series of shielded repair couplings are engineered for resistance to heavy earth loads and shear forces and also provide improved pipe alignment. For Cast Iron, Plastic or Steel pipe to Cast Iron, Plastic or Steel pipe.

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure) 5/16” driver required to tighten bolts.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-ELB (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-ELB Series of flexible couplings are listed with I.A.P.M.O. Non constant temperature rating is 140 F

     Function: MIFAB's MI-ELB Series of flexible rubber elbows are used to connect common household drain, waste and vent pipes quickly. They are extra long to replace fittings cut out at the joint during a fix or alteration.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-ARC-CL (specify size) shielded repair couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-ARC-CL Series of shielded repair couplings are tested and certified to ASTM Standard 1460-2010 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

     

     Function: MIFAB's MI-HUB-ARC-CL Series of shielded repair couplings are used to connect clay to cast iron, plastic, lead or steel pipe.

     

    Note:Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure) 5/16” driver required to tighten bolts.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-TRCC (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRCC Series of shielded transition couplings are tested and certified to ASTM Standard 1460-2012 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

    Function:MIFAB's MI-HUB-TRCC Series of shielded transition couplings are used to connect copper pipe to copper or plastic pipe

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). 5/16” driver required to tighten bolts

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-TRP (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRP Series of shielded transition couplings are tested and certified to ASTM Standard 1460-2012 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

    Function: MIFAB's MI-HUB-TRP Series of shielded transition couplings are used to connect plastic, steel or extra heavy cast iron pipe to plastic, steel or extra heavy cast iron pipe

     

    Note: Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). 5/16” driver required to tighten bolts.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-TRS (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRS Series of shielded transition couplings are tested and certified to ASTM Standard 1460-2010 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

    Function:MIFAB's MI-HUB-TRS Series of shielded transition couplings are used to connect plastic, steel or extra heavy cast iron pipe to copper pipe

     

    Note:Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). 5/16” driver required to tighten bolts.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-HUB-TRTW (specify size) shielded transition couplings are manufactured with gaskets made from an elastomeric compound that meets the requirements of ASTM C-564 housed inside a Type 300 stainless steel shield. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws surround the shield to provide the sealing force. The MI-HUB-TRTW Series of shielded transition couplings are tested and certified to ASTM Standard 1460-2012 and CSA Standard B602-2010 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

    Function: MIFAB's MI-HUB-TRTW Series of shielded transition couplings are used to connect thin wall plastic to Schedule 40 plastic or steel.

     

    Note:Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). 5/16” driver required to tighten bolts.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® MI-FLEX-DISH-1 dishwasher connector is manufactured out of a flexible PVC compound that meets the requirements of ASTM C-564. Two Type 300 stainless steel clamps tightened with 5/16” Type 300 stainless steel hex head screws provide the sealing force.

    Function: MIFAB's MI-FLEX-DISH-1 dishwasher connector is used to connect a dishwasher hose to a sink drain or garbage disposer.

     

    Note:Tighten bolts to 60 inch lbs. min. / max torque. Tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). 5/16” driver required to tighten bolts.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series of R1900-NH neoprene expansion joints are manufactured with Type 300 stainless steel clamps operated by Type 300 5/16” screws.

    Function: The R1900-NH Series of expansion joints are used to connect cast iron or plastic to cast iron or plastic pipe.

     

    Note:Tighten bolts to 60 inch lbs. min / max torque. They are tested to maintain 4.3 p.s.i. maximum line pressure (10' head pressure). 5/16” driver is required to tighten bolts.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series C1440-NH (select model number) expandable mecahnical stoppers. The C1440-NH meets and exceed the requirements of the ASTM C425 Standard.

    Function: Typically used to test gravity flow in non pressure DWV and sewer systems. The plastic plug will expand into the pipe opening as it is tightened.

     

Returned 20 Results
Downloads
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com