Call Toll Free: 800.465.2736  •  E-mail: sales@mifab.com  
Access Doors Backwater Valves BEECO C-PORT Roof
Pipe Supports
Counterline and Other Products Fabricated Stainless
Steel Drains
Fixture Carriers Floor and Area Drains Floor and Wall Cleanouts Floor Sinks Grease, Oil and
Specialty Interceptors
No Hub Couplings Roof Drains Trap Seal Primers and
Water Hammer Arrestors
Trench Drains Wall and Ground Hydrants
All Categories  > Interceptors
Results Per Page  
Returned 46 Results
  • Click for specsheet

     

    Specification: MIFAB Series LD leak detection system consists of an alarm box that is weatherproof rated NEMA 4/4X, 6'120VAC power cord, 360 (degree sign) viewable alarm light, 85db @ 10' solid tone alarm, and a silence and test button that isto be mounted to the nearest structure. Also included is a pressure switch that is made from Type 316 stainless steel and ismounted inside of the interceptor for oil and / or grease level detection and is connected to the alarm control box.

    Function: The purpose of the leak detection system is to monitor any leaks that may occur through the first wall of a doublewall interceptor. The leak detection system can only be used with an interceptor that has a double wall construction. It is typicallyused in high risk applications where the seal of the interceptor needs to be monitored.

  • Click for specsheet

     

    Specification: MIFAB Series HLA high level alarm system consists of an alarm control box that is weatherproof rated NEMA4/4X, 6' 120VAC power cord, 360 (degree sign) viewable alarm light, 85db @ 10' solid tone alarm, and a silence and test buttonthat is to be mounted to the nearest structure. Also included is a float switch that is made from Type 316 stainless steel and ismounted inside of the interceptor for oil and / or grease level detection and is connected to the alarm control box.

    Function: The purpose of the high level alarm system is to monitor and send an audible and visual alarm when the oil and / orgrease capacity is approximately 75% full. High level alarm systems can be installed on any MIFAB oil or grease interceptor toallow the customer to monitor oil and grease levels. This allows the interceptor to be maintained when required.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB MI-G-BO Series (specify Model #) of fixed bolt on extensions are manufactured from 10 gauge powderepoxy coated steel and are complete with lid sealing neoprene gasket and lockdown hardware.

    Function: Ideal for installations where the height of the interceptor needs to be increased to meet the finished floor while leavingthe inlet and outlet locations the same. The original lid of the interceptor is removed and the bolt on extension is placed on topof the lid sealing gasket. The original interceptor lid is then placed on top of the bolt on extension (lid sealing gasket is providedfor the top of the bolt on extension). The extra long lockdown hardware provided with the bolt on extension is used to secure thelid to the cross bar supports.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB XL-MI-G-BO Series (specify Model #) of fixed bolt on extensions are manufactured from 10 gaugepowder epoxy coated steel and are complete with lid sealing neoprene gasket and lockdown hardware.

    Function: Ideal for installations where the height of the interceptor needs to be increased to meet the finished floor whileleaving the inlet and outlet locations the same. The original lid of the interceptor is removed and the bolt on extension is placedon top of the lid sealing gasket. The original interceptor lid is then placed on top of the bolt on extension (lid sealing gasket isprovided for the top of the bolt on extension). The extra long lockdown hardware provided with the bolt on extension is used tosecure the lid to the cross bar supports.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G Series sanitary powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow ratings of 4-50 GPM and grease holding capacity of 8-100 lbs.

    Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it 1/2" off the ground, and steel powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. standard PDI-G101 and be so marked.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB Series MI-G-SS ____ sanitary powder epoxy coated inside and outside fabricated Type 304, 14 gaugestainless steel body hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unitshall include: removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s),external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, andsteel powder epoxy coated, non ski, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. StandardPDI-G101 and be so marked.

    Function: Used in restaurants, kitchens, institutions and other types of food processing areas where fat, oil and grease (FOG)drains with the wastewater. External flow control fitting must be installed according to manufacturer's instructions to control rateof flow into the interceptor and, therefore, the operating efficiency. Interceptor may be installed on the ground, semi recessedor flush with the floor. Single bolt lid design permits fast and easy removal of the lid for cleaning and maintenance. Standardpowder epoxy coated lid and body ensures maximum protection from contaminants. Sewer gas stopper prevents foul odors fromentering the kitchen area through the interceptor. ½” feet underneath the interceptor elevate the bottom steel plate from the wetground. Stainless steel interceptors are ideal for installations that are exposed to salt water, and / or corrosive cleaning agents.They will last longer than the typical fabricated steel interceptors.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB Series MI-G-DOS bacterial enzyme dispensing system is a self contained 120 or 220 VAC fully automatic dosing pump that is specifically system matched to MIFAB Series grease interceptors.

     

     

    Function: The MI-G-DOS system delivers a programmable pre-determined amount of bacterial enzyme liquid to MIFAB grease interceptors which effectively reduce fats, oils and greases (F.O.G.) into water and carbon dioxide thus reducing service intervals.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G-L 20-50 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 20-50 GPM and grease holding capacity of 40-100 lbs.

    Unit shall include: removable baffle assembly and cross bar, securing bolt(s), external vented flow control fitting, internal air relief bypass, and steel powder epoxy coated rectangular gasketed lid.

  • Click for specsheet

    List Prices

     

    MIFAB Series XL-MI-G 0-11 sanitary epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 75-750 lbs. and grease holding capacity of 150-1500 lbs.

    Unit shall include: fixed baffle assembly and removable cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orifice plate, internal air relief by-pass, and steel powder epoxy coated, non skid, rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G-SD 1-8 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 7-75 gpm and grease holding capacity of 14-150 lbs.

    Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air relief bypass, internal grease retention tray adjacent to grease draw-off valve, and steel powder epoxy coated, non skid rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G-SDH 1-7 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 7-50 gpm and grease holding capacity of 14-100 lbs.

    Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air relief by pass, internal steel cone, flexible draw-off hose and cap, hose clamp, line shutoff valve, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G-L-SDH 20-50 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 20- 50 gpm and grease holding capacity of 40-100 lbs.

    Unit shall include: removable baffle assembly and cross bar, deep seal trap covered by lid, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it 1/2" off the ground, internal steel cone, flexible draw-off hose and cap, hose clamp, line shut off valve, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    The shroud provides support for the interceptor and adjustability of the inlet and outlet dimensions to match drainage piping where necessary. The shroud can be set in the slab at the time of pouring. The shroud is secured and suspended in the slab by its anchoring flanges. The interceptor is easily accessible for cleaning and inspection simply by removing the cover that sits flush with the floor.

    MI-CS Series supplied with one interior & one exterior angle support bracket per side. Interior angle bracket to support interceptor (purchased separately), exterior angle bracket to form anchor flange.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-CSD 7-75 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel cover shroud.

    Unit to include: angle support brackets on outside to anchor shroud into underground and inside to support the MIFAB Series MI-G-SD(H) grease interceptor furnished (specify MI-G-SD or MI-G-SDH grease interceptor required), removable steel powder epoxy coated, non skid rectangular gasketed lid with two recessed pull ring handles, and holes on each side of shroud for adjustment of angle support brackets.

    MI-CS Series supplied with one interior & one exterior angle support bracket per side. Interior angle bracket to support interceptor (purchased separately), exterior angle bracket to form anchor flange.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G-AD 4-7 with flow rate of 20-50 gpm and grease holding capacity of 40-100 lbs. automatic recovery grease interceptor with removable internal basket strainer.

    Construction to be 16 gauge type 304 stainless steel heli-arc welded and polished to a #4 finish. Lid fastened down with stainless steel latches and catches welded in place. Built to NSF Standard #2 with affixed seal.

    Interceptor to include an electric draw-off valve and electronic sensors to control it and an audible alarm with visible lights. The interceptor shall be thermostatically controlled, maintaining the liquid within the device at an average 120 degrees to prevent grease/oil from congealing. Interceptor complete with all components required for a quick start up and is prewired to U.L. standards. The heating element, thermostat, and electrical connections shall be enclosed in a type 304 stainless steel housing box equipped with a gasketed removable stainless steel cover. Interceptor will include an external vented flow control fitting for installation between the inlet and fixtures that it serves and a collection box for the recovered grease/oils, 120 Volts, 20 Amps is the power required. Interceptor must be hard wired in the field.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-E-G electronic grease interceptor with powder epoxy coated interior and exterior, and 10 gauge fabricated steel solids interceptor with integral perforated sediment bucket removable through the bottom. Interceptor complete with 2" F.I.P. low inlet and 2" F.I.P. high outlet on other side for flow through installation and gasketed bottom lid secured with latches.

    MIFAB's electronic grease interceptor monitors the grease level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current grease level. A green light on the control panel indicates normal operating conditions. At 50% grease storage capacity, the green light will change to yellow. At 75% grease storage capacity, the yellow light changes to red, the alarm will sound, and the inlet will be closed by a motorized valve. The closed inlet prevents additional grease from entering the interceptor and from discharging into the piping system. The operator must remove the lid of the interceptor and remove the accumulated grease and clean off the grease sensing probe to ensure that the motorized valve opens and regular operation can resume. A back-up battery ensures continued operation during short power failures and closes for safety during extended failures. The control panel and internal controls are pre-wired by MIFAB. 115 volt main to 24 volt transformer and low voltage wiring from the control panel to probe inside of the interceptor to be provided by others.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB MI-G-RL Series (specify Model #) of replacement lids are manufactured from ¼” thick diamond platepowder epoxy coated steel.

    Function: Used to replace the lid of an existing MI-G grease interceptor.

  • Click for specsheet

    List Prices

     

    Regularly manufactured with an electrostatically applied baked powder coating and supplied with an external, vented, flow control fitting.

    Modifications are not available to dimensions of product.
    Choose MIFAB's Ml-G Hydro Mechanical Grease Interceptor Series when integral extensions, anchor flanges, and other optional variations are required.

    MIFAB Series MCL-G 0-7 sanitary powder epoxy coated inside and outside fabricated 14 gauge steel grease interceptor with flow rating of 4-100 gpm and grease holding capacity of 8-200 lbs.

    Unit shall include removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief bypass, feet underneath interceptor to elevate it to 1/2" off the ground, and steel powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101 and be so marked.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB Series MCL-G-L sanitary powder epoxy coated inside and outside fabricated 14 guage steel hydro mechanical grease interceptor with flow rating of (indicate) and grease holding capacity of (indicate). Unit shall include: removable baffle assembly and crossbar, securing bolt(s), external vented flow control fitting, internal air releif bypass, feet underneath interceptor to elevate it 1/2" off the ground, and steel powder epoxy coated rectangular gasketed lid.
    Function: Used in restaurants, kitchens, institutions and other types of food processing areas where fat, oil and grease drain with the waste water. External flow control fitting must be installed according to manufacturer's instructions to control rate of flow into the interceptor and therefore, the operating efficiency. Interceptor may be installed on the ground, semi-recessed or flush with the floor. Standard powder epoxy coated lid and body insures maximum protection from contaminants. 1/2" feet underneath the interceptor elevate the bottom steel plate from the wet grpound.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-G-P sanitary, high density polyethylene (HDPE) hydro mechanical grease interceptor with flow rating of 10-50 gpm and grease holding capacity of 20-100 lbs. HDPE material to be 1/4" (6) thick.

    Interceptor shall include: removable baffle assembly and cross bar, securing bolt(s), oversized neoprene gasket, external vented flow control fitting, internal air relief by pass and deep seal trap covered by the steel, powder epoxy coated, non skid lid(s), suitable for in or above ground installation.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB series MI-ROC sanitary acid resistant powder epoxy coated inside and outside. Fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of _____ and grease holding capacity of _____ . Unit shall include: I.P.S. inlet and outlet, cast iron drainage fittings to form a visible double wall deep seal trap, easily removable separator and filter screens, recessed, non skid rectangular gasketed lid for in or above ground use, removable cross bar, securing bolt(s). Unit shall be complete with three I.P.S. outlet connections. Plugs are provided for the outlet connections not required.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB Series MI-ROC____ sanitary acid resistant powder epoxy coated inside and outside. Fabricated 10 gaugesteel grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: F.I.P.inlet and outlet, cast iron drainage fittings to form a visible double wall deep seal trap, easily removable separator and filterscreens, recessed, non skid, rectangular gasketed lid for in or above ground use, removable cross bar, securing bolt(s). Unitshall be complete with three F.I.P. outlet connections. Plugs are provided for the outlet connections not required.

    Function: Used in restaurants, kitchens, institutions and other types of food processing areas where fat, oil and grease (FOG)drains with the wastewater. Single bolt lid design permits fast and easy removal of the lid for cleaning and maintenance. Standardpowder epoxy coated lid and body ensures maximum protection from contaminants.

  • Click for specsheet

    List Prices

     

    Regularly manufactured with an electrostatically applied baked powder coating and supplied with an external, vented, flow control fitting.

    Modifications are not available to dimensions of product.
    Choose MIFAB's MI-G-BO Grease Interceptor Series when integral extensions, anchor flanges, and other optional variations are required.

    MIFAB Series MCL-G-BO 0-7 sanitary powder epoxy coated inside and outside fabricated 14 gauge steel grease interceptor with flow rating of 4-100 gpm and grease holding capacity of 8-200 lbs.

    Unit shall include removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief bypass, feet underneath interceptor to elevate it to 1/2" off the ground, and steel powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101 and be so marked.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated non skid rectangular lid.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-O-HU sanitary powder epoxy coated inside and outside fabricated 10 gauge Steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless Steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connections on each side, and Steel powder epoxy coated non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-OS 1-4 sanitary powder epoxy coated inside and outside fabricated 10 gauge Steel oil/sediment interceptor with sludge capacity of 12-200 lbs. Interceptor complete with ANSI rated "Special Duty" ductile iron grate(s) with load rating over 10.000 lbs., removable sediment bucket and mud pan, deep seal trap with integral sewer gas stopper, internal vent system, cleanout plug and side outlet.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-HAIR lacquered cast iron hair and solids interceptor with internal stainless Steel perforated sediment bucket removable from bottom. Interceptor complete with 1-1/2" slip joint elbow inlet, 1-1/2" F.I.P. side outlet, and gasketed cleanout plug.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-HEL helicopter port fuel interceptor constructed from high strength 1/4" (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2" (51) fuel drain connection, 1" (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2" (51) interceptor drain plugs, channel support rails, and body corner lifting lugs.

    Interceptor shall be coated with Neutra-Rust on the inside and a Class A rated and approved fire retardant intumescent coating.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB Series MI-SAND/OIL____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steelsand and oil interceptor with a holding capacity of - see chart below. Interceptor complete with gasketed non-skid powder epoxycoated lid, removable sediment bucket with perforated baffle beside inlet, deep seal trap with integral sewer gas stopper, two 2”vent connections, adjustable oil draw off assembly and no hub inlet/outlet.

    Function: Used in service areas to receive wastewater with sand and oil contaminants. Sediment bucket with perforated baffledesigned to capture debris and prevent drain line clogging. Integral sewer gas stopper will prevent harmful gases from enteringvia the outlet. Electrostatically applied powder epoxy coating ensures extra long life.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-FISH-1-12 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale interceptor.

    Unit shall include: Sediment bucket with perforated baffle near inlet (3/8" (10) holes), primary removable straining baffle (1/2" (13) thick with 1/4" (6) holes), secondary removable straining baffle (1/2" (13) thick with 1/8" (3) holes), securing bolt(s), removable cross bar, stainless steel calibrated orifice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    MIFAB's electronic oil interceptor monitors the oil level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current oil level. A green light on the control panel indicates normal operating conditions. At 50% oil storage capacity, the green light will change to yellow. At 75% oil storage capacity, the yellow light changes to red, the alarm will sound, and the inlet will be closed by a motorized valve. The closed inlet prevents additional oil from entering the interceptor and from discharging into the piping system. The operator must remove the lid of the interceptor and remove the accumulated oil and clean off the oil sensing probe to ensure that the motorized valve opens and regular operation can resume. A back-up battery ensures continued operation during short power failures and closes for safety during extended failures. The control panel and internal controls are pre-wired by MIFAB. 115 volt main to 24 volt transformer and low voltage wiring from the control panel to probe inside of the interceptor to be provided by others.

  • Click for specsheet

    List Prices

     

    MIFAB's electronic oil interceptor monitors the oil level within the interceptor. A control panel built into a standard electrical box consists of a multi-level LED display that alerts the operator to the current oil level. A green light on the control panel indicates normal operating conditions. At 50% oil storage capacity, the green light will change to yellow. At 75% oil storage capacity, the yellow light changes to red, the alarm will sound, and the inlet will be closed by a motorized valve. The closed inlet prevents additional oil from entering the interceptor and from discharging into the piping system. The operator must remove the lid of the interceptor and remove the accumulated oil and clean off the oil sensing probe to ensure that the motorized valve opens and regular operation can resume. A back-up battery ensures continued operation during short power failures and closes for safety during extended failures. The control panel and internal controls are pre-wired by MIFAB. 115 volt main to 24 volt transformer and low voltage wiring from the control panel to probe inside of the interceptor to be provided by others.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB® Series MI-SOLID-S lacquered cast iron solids interceptor with internal stainless steel perforated sediment bucket removable through top. Interceptor complete with 2” F.I.P. inlet and outlet and gasketed lid secured with single handle.

    Function: Used in dental offices, jewellery stores and other areas that require interception of solids, sand, plaster, chips or valuables from lavatory or sink waste lines. Interceptor is cleaned by removing top cover and accessing internal stainless steel sediment bucket. Typically installed underneath the sink on the floor.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB® Series MI-SOLID-M medium capacity powder epoxy coated interior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and baffle assembly. Interceptor complete with 2” F.I.P. low inlet and 2” F.I.P. high outlet on other side for flow through installation.

    Function: Typically installed between the MI-G Series grease interceptor and the fixtures served either on or recessed in the
    floor. The solids interceptor will filter out solids and sediment from the fixture waste line before entering the related grease interceptor to reduce clogging and improve performance. Interceptor is cleaned by removing top access gasketed lid and accessing the internal sediment bucket.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB® Series MI-SOLID-LB small capacity powder epoxy coated inferior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket removable through the bottom. Interceptor complete with 2" F.I.P. low inlet and 2" F.I.P. high outlet on other sie for flow through installation and gasketed bottom lid secured with latches.

    Function: Used in dental offices, jewelry stores and other areas that require interception of solids, sand, plaster, chips or valuables from lavatory or sink waste lines. Bottom access design is ideal for installation underneath the fixture in place of the "P" trap. Interceptor is cleaned by removing the bottom cover and dropping the interior sediment bucket. Ensure that waste receptacle is placed underneath interceptor before maintenance. Typically installed suspended underneath the sink.

  • Click for specsheet

    List Prices

     

    Specification: MIFAB® Series MI-SOLID-L large capacity powder epoxy coated interior and exterior 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and baffle assembly. Interceptor complete with 3” F.I.P. low inlet and 3” F.I.P. high outlet on other side for flow through installation.

    Function: Typically installed between the MI-G Series grease interceptor and the fixtures served either on or recessed in the
    floor. The solids interceptor will filter out solids and sediment from the fixture waste line before entering the related grease interceptor to reduce clogging and improve performance. Interceptor is cleaned by removing top access gasketed lid and accessing the internal sediment bucket.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-SOLID-SA side access Type 304 14 gauge stainless Steel solids interceptor with internal stainless Steel perforated sediment bucket connected to a removable and gasketed side access latched lid. Interceptor complete with 2" female threaded inlet, 2" female threaded outlet on each side for right or left hand installation, and internal stainless steel flow control.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-SOLID-TA top access powder epoxy coated 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and gasketed top access latched lid. Interceptor complete with no hub inlet on one side and no hub outlet on other side for flow through installation.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-SAND 1-7 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orifice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-SD 1-10 sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sediment/drain interceptor. Unit shall include: visible deep seal trap, sewer gas stopper, internal air relief by-pass, 14 gauge slotted powder epoxy coated inlet grate, with slot size of 3/8" x 3" (10 x 76), and a removable sediment and mud pan.

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-LINT sanitary powder epoxy coated inside and outside fabricated 10 gauge steel lint interceptor with flow rate of 34-1536 gpm. Unit shall include: 1/2" (13) thick fixed primary straining baffle with 3/8" (10) holes and secondary 1/2" (13) thick removable straining baffle with 3/8" (10) holes, removable cross bar, securing bolt(s), stainless steel calibrated orifice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for specsheet

    List Prices

     

    MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of 34-1536 gpm. Unit shall include: 1/2" (13) thick fixed primary straining baffle with 3/8" (10) holes and secondary 1/2" (13) thick removable straining baffle with 3/8" (10) holes, removable cross bar, securing bolt(s), stainless steel calibrated orifice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

  • Click for spec sheet 

    List Prices                                   

      

     

     

    MIFAB® XL-MI-G-PL-750, 75 GPM grease interceptor with 750 lb. grease holding capacity. Interceptor has a limited lifetime warranty and is made in the USA out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor designed for above or below ground installation. Interceptor includes an adjustable lid system, external, vented flow control fitting, sample port access, and multiple outlet options. The steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. 

     

  • Click for spec sheet

    List Prices 

     

     

    MIFAB® XL-MI-G-PL-1150, 100 GPM grease interceptor with 1,150 lb. grease holding capacity. Interceptor has a limited lifetime warranty and is made in the USA out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor designed for above or below ground installation. Interceptor includes a dual adjustable lid system, external, vented flow control fitting, sample port access, and multiple outlet options. Steel encased composite lid provides a water / gas tight seal and have a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. 

     

     

Returned 46 Results
    
ASSE CSA UPC PDI MCAA
Site powered by Kaya CMS
MIFAB, Inc. | Our Reputation is Stainless