MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > Interceptors  > XL-MI-G Series 75 to 750 G.P.M. Large Capacity Hydro Mechanical Grease Interceptors
XL-MI-G Series 75 to 750 G.P.M. Large Capacity Hydro Mechanical Grease Interceptors

Click for specsheet

Click for downloads

List Prices

 

MIFAB Series XL-MI-G 0-11 sanitary epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of 75-750 lbs. and grease holding capacity of 150-1500 lbs.

Unit shall include: fixed baffle assembly and removable cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orifice plate, internal air relief by-pass, and steel powder epoxy coated, non skid, rectangular gasketed lid(s).

Specifications
No. of Lids

Note
Item Name

Series

XL-MI-G Series 75 to 750 G.P.M. Large Capacity Hydro Mechanical Grease Interceptors

MIFAB Design

 MIFAB is a recognized industry leader in the field of interceptor design and production. As such, we offer a variety of specialized options and site-specific applications too numerous to list in this price guide. Features such as sacrificial anode packs, all stainless steel construction and a variety of other special features available.

Maintenance & General Considerations
To obtain optimum operating efficiency of a properly sized and installed PDI certified grease interceptor, a regular schedule of maintenance must be adhered to. All PDI certified grease interceptors are furnished with manufacturer's operating and maintenance instructions, which must be followed to insure efficient satisfactory operation.
Sizing
Fixture Unit Sizing Method
Capacity

Disposition of Intercepted Materials
Grease and other waste matter that has been removed from the interceptor should not be introduced into any drain, sewer, or natural body of water. This waste matter should be placed in proper containers for disposal. Where recovery of grease is desired, it can be handled in a manner suitable to the authorities.
Grease Interceptors
Gallons Per Minute [Flow Rate]

Cleaning
All grease interceptors must be cleaned regularly. The frequency of grease removal is dependent upon the capacity of the interceptor and the quantity of grease in the waste water. Grease removal intervals may therefore vary from once a week to once in several weeks. When the grease removal interval has been determined for a specific installation, regular cleaning at that interval is necessary to maintain the rated efficiency of the interceptor. After the accumulated grease and waste material has been removed, the interceptor should be thoroughly checked to make certain that inlet, outlet and air relief ports are clear of obstructions.
Dimensional Drawing
File Not Found
Dimension F
Dimension E
Dimension D
Dimension C

No. of Bolts

Operation
Dimension B
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com