MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > Fixture Carriers  > MC-10-27-37-HS HORIZONTAL ADJUSTABLE HUB AND SPIGOT WATER CLOSET CARRIER WITH MC-10-27-37-HS AUX. 2" INLET & 37" LONG BARREL
MC-10-27-37-HS HORIZONTAL ADJUSTABLE HUB AND SPIGOT WATER CLOSET CARRIER WITH MC-10-27-37-HS AUX. 2" INLET & 37" LONG BARREL

Click for specsheet

Click for downloads

List Prices

 


SPECIFICATION: MIFAB® Series MC-10D-27-37-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

 

Function:Used with back to back off the floor plumbing fixtures that are wall mounted and have no contact with the finished floor. The 37” long barrel fitting eliminates the time and material required to install a battery of standard 13” long fittings. The auxiliary inlet is designed to receive waste from urinals and lavatories beside or opposite the closet carrier in order to reduce the amount of space required in the pipe chase. The closet carrier is completely concealed within the wall and supports the load of the fixtures through a faceplate and foot support system that is anchored to the floor. Sanitation underneath the fixtures is more efficiently and economically maintained when installed off of the floor compared to floor mounted.

 

Note: 14 1/2” (368) minimum space required between front of foot supports. 9” (229) minimum in wall space required between back of in wall foot supports.

 

Note: Foot supports and faceplate are assembled at the factory before shipment in the typical siphon jet water closet configuration and are reversible for the blowout water closet design.

Specifications
Item Name

Series

Weight

Dimensional Drawing
File Not Found
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com