MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > C-PORT Roof Pipe Supports
 
Results Per Page  
Returned 29 Results
  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - see chart
    Material
    Base - 100% recycled rubber, UV resistant
    Strut (on C5-B) - 14 gauge galvanized steel (1 5/8” wide x 7/8” tall)
    Maximum Load
    CXM-B - 150 lbs.
    C5-B - 300 lbs.

    Function: The CXM-B and C5-B Series provide an economic alternative. They are perfect for supporting conduit or smaller pipe.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - see chart
    Material
    Base - 100% recycled rubber, UV resistant

    Maximum Load
    CXH-150 Lbs.

    Function: The CXH Series provide an economic alternative. They are ideal for supporting conduit or smaller pipe.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - see chart
    Material
    Base - 100% recycled rubber, UV resistant
    Maximum Load
    CXP - 500 lbs.
    CXP-2 - 800 lbs.

    Function: The CXP Series supports provide an economic alternative. They are ideal for supporting conduit or pipe. Strut and clamps by others.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Base with 14 gauge Galvanized Channel (13/16” high)
    Dimensions -4 7/8" High Dimension
    Material - 100% recycled rubber, UV resistant
    Maximum Load - 750 lbs. - for each 9.6” long support

    Function: C Series channel support is designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. It is UV resistant and suitable for installation on most types of roofing material or other flat surfaces. Can be used as a curb (sleeper) replacement.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 2.50” Height x 12” Width x Length as specified in chart
    Material
    Base - 100% recycled rubber, UV resistant
    Maximum Load - 1,200 lbs. - for each 12” long support

    Function: The CXW Series is designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. The wide body of the base gives this support series superior stability and load bearing capability. It is suitable for most types of roofing material or other flat surfaces. Strut and clamps by others.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    C510 - 5 5/8” Height x 6” Width x 9.6” Length
    C610 to C640 - 6 1/8” Height x 6” Width x 9.6” to 38.5” Length
    Material
    Base - 100% recycled rubber, UV resistant
    Channel - 14 gauge galvanized steel (1 5/8” wide x 1 5/8” high)
    Maximum Load - 750 lbs. - for each 9.6” long support

    Function: The C5 Series and C6 Series are designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. Both series provide additional height, beyond the capability of the original C Series. The C6 Series is applicable where building codes require pipes to be at least 6” above the roof surface.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 3.3125” Height x 12” Width x Length as specified in chart
    Material
    Base - 100% recycled rubber, UV resistant
    Strut - 14 gauge galvanized steel
    Maximum Load - 1,200 lbs. - for each 12” long support

    Function: The CW Series is designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. The wide body of the base gives this support series superiorstability and load-bearing capability. It is suitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    3.3125" Height x 12" Width x Length as specified in chart
    EPDM Gasket - 24" Wide x Length as specified in chart
    Material
    Base - 100% recycled rubber, UV resistant
    Strut - 14 gauge galvanized steel
    Maximum Load - 1,200 Lbs. ? for each 12" long support

    Function: The CGW-E Series channel support is designed for superior support of gas and refrigeration piping systems, cable trays, electrical conduit, multiple lines, HVAC equipment and many other applications. The wide body of the base gives this support series superior stability and load-bearing capacity. The Gasket Series can be glued down to the roof, and the EPDM gasket provides an extra protective barrier between the rubber base and roof surface.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    3.3125" Height x 12" Width x Length as specified in chart
    TPO Gasket 24" Wide x Length as specified in chart
    Material
    Base 100% recycled rubber, UV resistant
    Strut 14 gauge galvanized steel
    Maximum Load - Maximum Load 1,200 Lbs. for each 12" long support

    Function: The CGW-T Series channel support is designed for superior support of gas and refrigeration piping systems,cable trays, electrical conduit, multiple lines, HVAC equipment and many other applications. The wide body of the base gives this support series superior stability and load-bearing capacity. The Gasket Series can be glued down to the roof, and the TPO gasket provides an extra protective barrier between the rubber base and roof surface.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - 4” Height x 6” Width x 9.6” Length
    Overall height as specified in chart
    Material
    Base - 100% recycled rubber, UV resistant
    Strut - 14 gauge galvanized steel (1 5/8” wide x 13/16” tall)
    Rod - Two ½” electro zinc plated all threaded rod risers
    Maximum Load - 400 lbs.

    Function: The CE Series is designed for extended support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. It is suitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - 2 ½” Height x 12” Width x 12” Length
    Overall height as specified in chart
    Material
    Base - 100% recycled rubber, UV resistant
    Strut - 14 gauge galvanized steel (1 5/8” wide x 13/16” tall)
    Rod - Two ½” electro zinc plated all threaded rod risers
    Maximum Load - 800 lbs.

    Function: The CEW Series is designed for extended support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. The wide-bodied base provides additional stability. It issuitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Material
    Base - 100% recycled rubber, UV resistant
    Roller - rubber
    Maximum Load
    - 300 lbs.

    Function: The CRM Series is designed for superior support of gas and refrigeration pipes at a higher elevation from the roof surface. The roller allows for longitudinal movements of the pipe. The CRM provides a less expensive alternative to the larger roller series products. It is suitable for most types of roofing material or other flat surfaces, and is ideal for smaller pipes. The roller bracket has roller mounting holes 1" apart so that the roller can be adjusted from 6 1/4" or 7 1/4" from the center line to the ground.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - Width of 6” x Length of 9.6”
    Roller Width - 3”, 4”, or 6” rollers are available (See Chart)
    Total Height to Roller Centre - ranges from 6" or 7" (See Chart)
    Material
    Base - 100% recycled rubber, UV resistant
    Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
    Maximum Load - 500 lbs.

    Function: The CR Series is designed for superior support of gas and refrigeration pipes. The roller allows for longitudinal movements of the pipe. This support is suitable for most types of roofing material or other flat surfaces. The roller bracket has roller mounting holes 1" apart so that the roller can be adjusted from 6" or 7" from the centerline to the ground.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - Width of 6” x Length of 9.6”
    Roller Width - 3”, 4”, or 6” rollers are available (See Chart)
    Total Height to Roller Centre - ranges from 8” to 12” (See Chart)
    Material
    Base - 100% recycled rubber, UV resistant
    Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
    Extending Rods and Horizontal Rod - ½” electro zinc plated all threaded rod risers
    Maximum Load - 300 lbs.

    Function: The CRE Series is designed for superior support of gas and refrigeration pipes at a higher elevation from the roof surface. The roller allows for longitudinal movements of the pipe. This support is suitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - 12” Width x 12” Length
    Roller Width - 3”, 4”, or 6” (See Chart)
    Total Height to Roller Centre - 12” or 16” (See Chart)
    Material
    Base - 100% recycled rubber, UV resistant
    Roller - rubber (cast iron galvanized rollers for 6” pipe are also available)
    The extending rods, as well as the horizontal rod that the roller rests on, are all ½” electro zinc plated all threaded rod risers
    Maximum Load - 500 lbs.

    Function: The CREW Series support is designed for superior support of gas and refrigeration pipes. The roller allows for longitudinal movements of the pipe. The wide-bodied base provides additional stability and load-bearing capacity. This supportis suitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Two (2) Bases Bridged with 12 gauge Galvanized Channel (1 5/8” high)
    Dimensions - 5 5/8” High x 6” Wide x Bridge Length (Overall Length)
    Material - 100% recycled rubber, UV resistant
    Load Rating - Each base rated at 500 lbs. Refer to beam load of channel at various lengths as other factor (see Strut catalog)

    Function: CB Bridge channel is designed as a superior sleeper for HVAC equipment, cable tray, roof walkway systems, refrigeration equipment and many other applications. It is UV resistant and suitable for installation on most types of roofingmaterial or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 10” High x 9.6” Base Length x 12” to 24” Crossbeam Width (See Chart)
    Material
    Base - 100% recycled rubber, UV resistant
    Crossbeam and Uprights - 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
    Maximum Load - 500 lbs.

    Function: The CES Series can support gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. It is designed for rooftop applications requiring a heavier load bearing, and is suitablefor most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - 12” Width x 12” Length
    Material
    Rubber Base - 100% recycled rubber, UV resistant
    Base Strut - 14 gauge galvanized steel
    Crossbeam - 1 5/8” x 3 1/4”, 12 gauge galvanized steel, back to back strut
    Upright - 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
    Maximum Load - 1,200 lbs.

    Function: The CESHW Series can support gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. It is designed for rooftop applications requiring a heavier load bearing, and is suitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 24” Crossbeam Width x 12” Base Length x 24” to 48” Height (See Chart)
    Material
    Base - 100% recycled rubber, UV resistant
    Crossbeam and Uprights - 1 5/8” x 1 5/8”, 12 gauge galvanized steel strut
    Maximum Load - 600 lbs.

    Function: The CESW Series can support gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. It is designed for rooftop applications requiring a heavier load bearing, and is suitablefor most types of roofing material or other flat surfaces. The wide bases provide this series with added stability. The CESW Series is suitable for use with one or two pipe hangars (by others).

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 24" Crossbeam Width x 12" Base Length x 24" to 48" Height (See Chart)
    Pipe Size: Maximum pipe size - 8". Pipe clearance from roof is 6" to 36".
    Material
    Base - 100% recycled rubber, UV resistant
    Crossbeam and Uprights - 1 5/8" x 1 5/8", 12 gauge galvanized steel strut
    Maximum Load - 700 lbs.

    Function: The CESWX Series can support gas and refrigeration piping systems, cable tray, electrical Conduit multiple lines,HVAC equipment and many other applications. It is designed for rooftop applications requiring a heavier load bearing, and it issuitable for most types of roofing material or other flat surfaces. The 12" x 24" base area provides this Series with added stabilityand load bearing. The CESWX Series is suitable for use with one or two pipe hangers (by others).

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 24" Crossbeam Width x 12" Base Length x 24" to 48" Height (See Chart)
    Pipe Size: Maximum pipe size - 8". Pipe clearance from roof is 6" to 36".
    Material
    Base - 100% recycled rubber, UV resistant
    Crossbeam and Uprights - 1 5/8" x 1 5/8", 12 gauge galvanized steel strut
    Maximum Load - 1,600 lbs.

    Function: The CESWXX Series can support gas and refrigeration piping systems, cable tray, electrical Conduit multiple lines,HVAC equipment and many other applications. It is designed for rooftop applications requiring a heavier load bearing, and it issuitable for most types of roofing material or other flat surfaces. The 48" x 12" base area provides this Series with added stabilityand load bearing. The CESWXX Series is suitable for use with one or two pipe hangers (by others).

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Telescopic Crossbeam
    Outer Piece Dimensions - 1 7/8” x 1 7/8”
    Inner Piece Dimensions - 1 5/8” x 1 5/8”
    Material - 12 gauge galvanized steel
    Vari-Angle Bracket
    Dimensions - 5 7/8” x 1 7/8”
    Material - 1/4” Hot-rolled, zinc plated carbon steel
    Base (DSA10)
    Dimensions - 4” Height x 6” Width x 9.6” Length
    Maximum Load - 800 lbs.
    Material (both models) - 100% recycled rubber, UV resistant

    Function: The DSA Series is designed specifically for ductwork. The telescopic crossbeam allows for easy size adjustments. The bases feature vari-angle supports to adapt to any roof pitch and are made of 100% recycled rubber. Narrower bases are used with the DSA10 Series.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Telescopic Crossbeam
    Outer Piece Dimensions - 1 7/8” x 1 7/8”
    Inner Piece Dimensions - 1 5/8” x 1 5/8”
    Material - 12 gauge, galvanized steel
    Vari-Angle Bracket
    Dimensions - 5 7/8” x 1 7/8”
    Material - 1/4” Hot-rolled, zinc plated carbon steel
    Base (DSA10)
    Dimensions - 2 1/4” Height x 12” Width x 12” Length
    Maximum Load - 1,000 lbs.
    Material (both models) - 100% recycled rubber, UV resistant

    Function: The DSAW Series is designed specifically for ductwork. The telescopic crossbeam allows for easy size adjustments. The bases feature vari-angle supports to adapt to any roof pitch and are made of 100% recycled rubber. Wide bases are used with the DSAW Series.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Base with 12 gauge Galvanized Channel (1 5/8” high) and Adapter Leg
    Dimensions - 5 5/8” High (not including height of adapter leg) x6” Wide x Length (Base Length)
    Material - 100% recycled rubber, UV resistant
    Adapter Fitting - 1 7/8” x 1 7/8” channel with 9/16” holes on all three (3) sides.
    Maximum Load - 750 lbs. - for each 9.6” long support

    Function: CS Vari-Angle support is variable angle support designed for ventilation duct, walkway systems, HVAC equipment and many other applications installed on sloped or uneven surfaces. Adapter leg will accommodate 1 5/8” x 1 5/8” steel strut for framing. It is UV resistant and suitable for installation on most types of roofing material and sloped surfaces.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions - 4 7/8” High x 6” Wide x 9.6” to 38.5” Length (Base Length)
    Materials
    Base - 100% recycled rubber, UV resistant
    Strut - 14 gauge Galvanized Channel
    Rod - ½” electro zinc plated all threaded rod risers
    Gasket - 3” x 3”
    Maximum Load - 750 lbs. - for each 9.6” long support

    Function: The CZ Seismic Series is designed for superior support of gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications. This is a penetrating support fastened to the structureunder the membrane. It is ideally designed for hurricane resistance or seismic applications. It is suitable for most types of roofing material or other flat surfaces.

  • Click for specsheet

    Click for downloads

    List Price

     

    Specification:
    Dimensions - 2” High x 5” Wide x Length (Base Length)
    Material
    Base - 100% recycled rubber, UV resistant
    Maximum Load - 500 lbs.
    Function: The AP Series is designed to provide support for all electrical and HVAC equipment. Grooved recessed tray prevents movement and dampens vibration. Allows water passage; prevents growth of moss and mold. Lightweight. Consult roofing manufacturer or engineer for roof loading.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Base - Recycled rubber with 14 gauge Galvanized combination
    channel fitting. (Back to back 13/16" strut welded to galvanized steel plate.)
    Dimensions: 4” High x 6” Wide x 9.6” Long
    Material: 100% recycled rubber, UV resistant
    Maximum Load - 350 lbs.

    Function: The CC Series is designed for support of copper piping on any roofing material or other flat surfaces. The channel will accept strut clamps (by others) for adjustable heights.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Material
    Base - Recycled rubber, UV resistant
    Dimensions: 6” wide x 4” high x 4 ½” long
    Pipe Clamp Material: Rubber lined clamps. Specify clamp size:
    1/2”, 3/4”, 1”, 1 1/4”, 1 1/2” and 2” pipe clamp sizes available.
    Order by Suffix -50, -75, -100, -125, -150 or -200.
    Threaded Rod / Hardware: Electro Plated Steel
    Maximum Load - 150 lbs.

    Function: The CSE Series pipe / tubing support is engineered to support single piping systems where elevation adjustment is required.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:
    Dimensions
    Base - 2” High x 5” Wide x 36” Length
    Platform: 24” Wide x 36” - 72” Length
    Material
    Base - 100% recycled rubber, UV resistant
    Platform: Galvanized steel
    Maximum Load - 600 lbs.

    Function: The CP Series is designed as a non-penetrating lightweight to bring to level platform surface. It is used for air conditioning, air condensing units, HVAC, and other electrical units. Free-flow leg system allows water passage. Other featuresinclude: prohibits moss and mold growth, easy to install, easy movement brackets that are suitable for all types of equipment, and adjustable. Consult roofing manufacturer or engineer for roof loading.

Returned 29 Results
Downloads
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com