MiFab logo

Serving all of the USA, Canada, Australia and the Middle East, MIFAB can provide you with the quality, engineered plumbing and drainage solutions you need. Innovative product designs save the installer time and material cost and provides the owner with higher quality cast stainless steel drains and cleanouts for the same cost as the industry standard nickel bronze. Contact us today to learn more.

All Categories  > Access Doors
Results Per Page  
Returned 22 Results
  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series UA is a multi-purpose access door. It is designed for flush installation into drywall, block or tile, walls and ceilings. The door features rounded safety corners, concealed hinge, flush with frame fit, a unique white finish, and a 3/8” turn back in the door panel for extra rigidity and safety

    Material - UA Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The UASS stainless steel Series is 16 gauge #304 stainless steel door and frame. Aluminum doors are available as an option up to the 24" x 24" (610 x 610) size. The door and frame is 16 ga., type 5052-32 aluminum.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. Turned back around edges for extra rigidity.

    Frame - The frame has pre-punched mounting holes for simple installation.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, paddle latch, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

     

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:MIFAB® Series MDW access door is designed for installation after the drywall has been applied and when a concealed outer flange is required. The outer frame has a galvanized drywall taping bead. Drywall cement can be applied over the beading at the same time as the wallboard joints and corners. Only the door is visible. It has a unique white finish.

    Material - MDW Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The MDWSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. Turned back around edges for extra rigidity.

    Frame - Drywall taping bead on all sides.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, paddle latch, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:-The MIFAB Series CAD recessed access door is designed for use in acoustical, drywall, or tiled surfaces. The door panel is recessed 5/8” (15) to allow the insertion of various types of material. Only the thickness of the door and frame edges are exposed. It has a unique white finish.

    Material:- CAD Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The CADSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

     Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Recessed 5/8" (15) door pan to accept tile, drywall or other finishing materials.

    Frame - Flush to surface.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

     

     

  •  

    Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series CAD-DW recessed access door is designed for use in acoustical, drywall, or tiled surfaces. The door panel is recessed 5/8” (15) to allow the insertion of various types of material. The outer frame has a galvanized drywall taping bead. Drywall cement can be applied over the beading at the same time as the wallboard joints and corners. It has a unique white finish.

    Material - CAD-DW Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The CAD-DWSS is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Recessed 5/8" (15) door pan to accept tile, drywall or other finishing materials.

    Frame - Drywall corner bead on all sides.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series CAD-PL recessed access door is designed for use in acoustic plaster walls and ceilings. The door panel is recessed 5/8” (15) and is lined with a self-furring metal lath to allow the insertion of plaster within the door panel. A 2 3/4” (70) wide metal lath extends from the perimeter of the frame. Only the thickness of the door and frame edges are exposed. It has a unique white finish.

    Material - CAD-PL Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The CAD-PLSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Recessed 5/8" (15) door pan with self-furring metal lath to accept plaster.

    Frame - Mounting flange is 1 1/8" (28) wide and recessed 5/8" (15) from the door and lined with a 2 3/4" (70) wide self-furring metal lath.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, or vandal resistant latch. All of MIFAB's cylinder key lock are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series CAD-FL access door is designed for flush installation in drywall or plaster surfaces. The door panel is flush with the frame. When installed flush with the wall or ceiling, only the door panel is exposed. A mounting bracket is recessed 5/8” (15) from the door. It has a unique white finish.

    Material - CAD-FL Series is a 16 gage satin coat door and a 16 gage satin coat frame. The CAD-FLSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. Turned back around edges for extra rigidity.

    Frame - Flush to surface. Mounting flange is 1 1/8" (28) wide and recessed 5/8" (15) from the door.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, paddle latch, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:MIFAB® Series CAD-FL-PL recessed access door is designed for flush installation in drywall or plaster surfaces. The door panel is flush with the frame. When installed flush with the wall or ceiling, only the door panel is exposed. A 2 3/4” (70) wide metal lath on all sides provides a rigid frame. A mounting bracket is recessed 5/8” (15) from the door. It has a unique white finish.

    Material -CAD-FL-PL Series is a 16 gage satin coat door and a 16 gage satin coat frame. The CAD-FL-PLSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. Turned back around edges for extra rigidity.

    Frame - Mounting flange is 1 1/8" (28) wide and recessed 5/8" (15) from the door. A 2 3/4" (70) wide self furring metal lath lines the flange.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, paddle latch, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series CAD-FR fire resistant access door is designed for use in a suspended drywall ceiling. The CAD-FR is not fire rated. However, the combination of steel and fire rated tile supplied by others may maintain the fire resistant quality of the ceiling assembly. The door is recessed 1 ½” (38) to accommodate dual layered ceiling tile. Consult local Fire Codes for each application.

    Material - CAD-FR Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The CAD-FRSS stainless steel Series is 16 gage # 304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Recessed 1 1/2" (38) door panel to accept tile, drywall or finishing materials.

    Frame - Flush to surface. Mounting flange is 1 1/8" (28) wide and recessed 5/8" (16) from the door.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush Mounted, screwdriver operated cam. Optional - Allen key, cylinder key, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specifications: MIFAB® Series UD Series of duct access doors are designed to provide access to equipment installed within ducts. The door panels are insulated and gaskets between the panel and frame will assure tight seals without obstruction in the air system.

    Material: UD Series is 24 gage galvanized steel door and 24 gage galvanized steel frame.

    Finish: Not painted. Shipped in natural galvanized steel finish.

    Door: 1" (25) thick, double wall construction and insulated.

    Frame: With bend over tabs to attach to the duct.

    Hinge: Continuous piano type.

    Latch: Standard - Cam latch is self-tightening and hand operated.

    Packaging: Individual pack

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MPFR fire rated access door is approved by Underwriters Laboratories Inc., for 1 ½ hours, “B” label in walls and is approved by Warnock Hersey for 2 hours in ceilings and 3 hours in walls. The door meets ANSI-UL 10B standards. The same door can be used in walls and ceilings. Tests were conducted using mild steel and type 304 stainless steel.


    Material -MPFR Series is 16 gage satin coat steel front door with 20 gage backliner and 16 gage satin coat steel frame. The MPFRSS Stainless Steel Series is 16 gage #304 stainless steel front door with 20 gage backliner and 16 gage #304 stainless steel frame. Finish: Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. Self-closing. Can be opened from the inside or back of the door with MIFAB's unique thumb turn latch.

    Frame - Four piece welded frame with masonry mounting straps.

    Hinge - Concealed pivot pins.

    Spring - Heavy duty. An extra spring is provided with every door greater than 14" x 14" (356 x 356) for ceiling installation. Both springs must be attached to the door to ensure that the door will close when installed in the ceiling.

    Latch - Standard - Flush mounted, interchangeable turn ring operator and key operator latch. Optional - cylinder key lock. All of MIFAB's cylinder key locks are keyed alike.

    Fire Rating - Underwriters Laboratories "B" label. 1 1/2 hours for walls. Warnock Hersey: 1 hour combustible ceilings and walls, 2 hour non-combustible ceilings, and 3 hour non-combustible walls. Ceiling fire ratings are up to and including the 24" x 36" (610 x 914) size.

    Insulation - Roxul Rockboard 80. 2" (50) thick and fire retardant.

    Packaging - Individual pack.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification:MIFAB® Series MFRU uninsulated fire rated access door is approved by Underwriters Laboratories Inc., for 1 ½ hours, “B” label in walls. The door meets ANSI-UL 10B standards. It has a unique white finish.

    Material - : MFRU Series is 16 gage satin coat steel door and frame. The MFRUSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. Self-closing. Can be opened from the inside or back of the door with MIFAB's unique thumb turn latch.

    Frame - Four piece welded frame with masonry mounting straps.

    Hinge - Concealed pivot pins.

    Spring - Heavy duty.

    Latch - Standard - Flush mounted, interchangeable turn ring operator and key operator latch. Optional - cylinder key lock. All of MIFAB's cylinder key locks are keyed alike.

    Fire Rating - Underwriters Laboratories "B" label. 1 1/2 hour for walls. Insulationnot required.

    Packaging - Individual pack.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MPFR-DW fire rated access door is approved by Underwriters Laboratories Inc., for 1 ½ hours, “B” label in walls and is approved by Warnock Hersey for 2 hours in ceilings and 3 hours in walls. It meets ANSI-UL 10B standards. The same door can be used in walls and ceilings. Tests were conducted using mild steel and type 304 stainless steel. The MPFR-DW incorporates a drywall bead type of frame for a concealed frame application


    Material - MPFR-DW Series is 16 gage satin coat steel front door with 20 gage backliner and 16 gage satin coat steel frame. The MPFR-DWSS Stainless Steel Series is 16 gage #304 stainless steel front door with 20 gage backliner and 16 gage #304 stainless steel frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors havea #4 brush satin finish.

    Door - Flush to frame. Self-closing. Can be opened from the inside or back of the door with MIFAB's unique thumb-turn latch.

    Frame - Four piece welded frame with masonry mounting straps and drywall bead frame for concealed drywall applications.

    Hinge - Concealed pivot pins.

    Spring - Heavy duty. An extra spring is provided with every door greater than 14" x 14" (356 x 356) for ceiling installation. Both springs must be attached to the door to ensure that the door will close when installed in the ceiling.

    Latch - Standard - Flush mounted, interchangeable turn-ring operator and key-operatorlatch. Optional - cylinder key lock. All of MIFAB's cylinder key locks are keyed alike.

    Fire Rating - Underwriters Laboratories "B" label. 1 1/2 hours for walls. WarnockHersey: 1 hour combustible ceilings and walls, 2 hour non-combustible ceilings and 3 hour noncombustible walls. Ceiling fire ratings are up to and including the 24" x 36" (610 x 914) size.

    Insulation - Roxul Rockboard 80.2" (50) thick and fire retardant.

    Packaging - Individual pack.

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-SAD medium security access door is designed for drywall, masonry, or concrete construction, providing the security required in today's schools, hospitals, hotels, and correctional institutions. It has a unique white finish.

    Material - MI-SAD Series is 12 gage steel door and 3/16” angle steel frame. The MI-SADSS Stainless Steel Series is 12 gage #304 stainless steel door and 3/16” (4) angle stainless steel frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame.

    Frame - 3/16" (4) x 1 1/2" (38) x 1 1/2" (38) angle steel, angle welded with joints ground smooth. The frame has pre-punched 3/16" (4) mounting holes for easy installation.

    Hinge - Two heavy duty butt hinges welded to the door and frame.

    Latch - Standard - Cylinder key lock. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-SADH high security access door is designed to provide security access, with a strength and durability to endure abusive and vandal-prone conditions, common in many institutions. It has a unique white finish.

    Material - MI-SADH Series is 10 gage steel door and 1/4” angle steel frame. The MI-SADHSS Stainless Steel Series is 10 gage #304 stainless steel door and 1/4” (6) angle stainless steel frame.

    Finish - Steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame.

    Frame - 1/4" x 2" x 2" (6 x 50 x 50) angle steel, angle welded with joints ground smooth. The frame has pre-punched 1/4" (6) mounting holes for easy installation.

    Hinge - Two heavy duty butt hinges welded to the door and frame.

    Latch - Standard - Best Lock #1E7D4-C228-RP3-626 with key. Optional - locks provided by others.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-FVP flush valve panel is designed for back supply toilets and urinals where the flush valve is built into the wall. This panel allows easy access to service the flush valve by maintenance personnel. The panel provides protection to the flush valve from vandalism.

     

    Material - MI-FVP Series is 16 gage satin coat steel door and 16 gage satin coat steel frame. The MI-FVPSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Has a 1 1/2" (38) diameter hole in the center of the panel for theflush valve pushbutton .

    Optional- solid door with no hole in the middle - Suffix "-NH".

    Frame - Two piece construction with 5/16" x 11/16" (8 x 17.5) OBL Slots for easy installation.

    Latch - Four 1/4" (6) - 20 x 1" (25) tamper resistant stainless steel Torx screws.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-SF surface access door is designed for surface installation on drywall, masonry, or thin-coat plaster. The door is attached to the frame with a continuous piano hinge allowing 175 degree opening. It has a unique white finish

    Material - MI-SF Series is 16 gage steel door and frame. The MI-SFSS Stainless Steel Series is 16 gage #304 stainless steel door and frame.

    Finish - Satin coat steel doors have a primed white finish. Stainless steel doors have a #4 brush satin finish.

    Door - Flush to frame. One 1/4" (6) hole in each corner. A 3/8" (9) wide outer perimeter space of the frame is bent on a fifteen degree angle toward the wall.

    Hinge - Continuous piano hinge. 175 degree opening.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, or vandal resistant latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series MI-VB valve box is designed to provide easy access to all types of valves and controls that are concealed in the wall and need to be protected by a fully enclosed box. The MIFAB MI-VB-SM valve box is designed to provide easy access to all types of valves and controls that extend outside of the finished wall and need to be protected by a fully enclosed box. The depth of all valve boxes can be customized to meet any rough in requirements.

    Material - MI-VB Series is a 16 gage satin coat steel door and frame and a 20 gage satin coat steel box. The MI-VB-SM is 16 gage stain coat steel door and box. The MI-VBSS is a 16 gage #304 stainless steel door and frame with a 20 gage #304 stainless steel box. The MI-VB-SMSS is a 16 gage #304 stainless steel door and box.

    Finish - All Satin Coat VB's have a prime white finish. MI-VBSS has a #4 brush satin finish on door and frame and a 2B finish on the box. MI-VB-SMSS has a #4 brush satin finish on door as well as the box.

    Door - MI-VB Series - flush to frame. Turned back around edges for extra rigidity. MI-VB-SM Series - overlaps box, providing a tight secure fit. Optional - opening cut out of door to allow for glass or plastic window to be installed - window material supplied by others.

    Frame - MI-VB Series - pre-punched mounting holes for simple installation. It is welded to the box.

    Hinge - Concealed pivot pins.

    Latch - Standard - Flush mounted, screwdriver operated cam. Optional - Allen key, cylinder key, or paddle latch. All of MIFAB's cylinder key locks are keyed alike.

    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series PA plastic access door is designed to provide easy access to plumbing and cables behind walls and ceilings. The door is removable from the frame and fits tightly with snap latches. The white finish can be painted or wallpapered or left as is to match the surrounding environment. This door should not be installed near any existing or potential source of excessive heat or open flame.

    Material - PA Series is made of 1/8” (3) thick high impact styrene plastic with U.V. stabilizers to prevent fading and corrosion.

    Finish - White.

    Door - Flush to frame - rounded safety corners. Two pull tabs on the back of the door allow door to be pulled back into the frame from behind walls and ceilings.

    Frame - One piece outside flange that is 1 1/2" (38) wide with a 5/8" deepmounting flange.

    Latch - Snap latches allow door to fit tightly into frame.

    Packaging - 8" x 8" (203 x 203) and 14" x 14" (356 x 356) doors arepacked 15 per carton and the 14" x 29" (356 x 736) doors are packed 5per carton.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series FHA and FHG floor access doors are for interior or exterior use where easy access is required. The angle frame construction with integral anchor flange is designed to be cast into concrete. Available in either an acid resistant, powder epoxy coated steel (grey color) (FHG) or aluminum (FHA). Standard units withstand load bearing of 300 lbs. per square foot. MIFAB's floor access doors are designed for safety, durability and ease of operation.

    Material - FHG Series has a door made of 3/16” (5) thick A36 diamond plate. FHA Series has a door made of 3/16” (5) thick structural grade aluminum diamond plate. Both doors can support 300 lbs. per square foot live load. Frame material is composite hot rolled steel angle frame.

    Finish - FHG Series is an acid resistant, powder epoxy coated steel (grey color). FHA Series is an aluminum mill finish. Frame is finished with a bituminous coating.

    Door - Flush to frame. Equipped with an automatically locking hold open arm that locks the door in the open position. Also available are 1/4” (6 mm) thick doors reinforced to meet a 10,000 lb. load rating. (without impact for the FHA Series).

    Frame - Complete with a 1" (25) anchor flange. All hardware is Type # 316 stainlesssteel.

    Hinge - Tamper proof steel hinges with stainless steel pins.

    Opening Device - Automatic locking hold open arm with red vinyl grip allows door to open 90 degrees.

    Handle - Stainless steel recessed lift handle in the door.

    Latch -  The following lock options are available: padlock staple, Type # 316 stainless steel snap lock with removable handle, recessed hasp, Type # 316 stainless steel pentahead, keyed deadbolt lock or hasp and staple. The standard latch used is the compression lever latch.


    Packaging - Individual pack.

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: MIFAB® Series RHA and RHG roof hatches are designed to provide convenient, economical access to the roofs of buildings. They are available in either prime coated galvanized steel (RHG) or aluminum (RHA). All hatches are designed with weather resistant gasketing to ensure long life, low maintenance and ease of operation. Roof hatches install easily over the roof opening and are secured from the base flange to the roof deck.

    Material - RHG cover is 14 gage galvanized steel and 20 gauge steel liner. RHA cover is .090” aluminum with a .050 aluminum liner. The inside of the cover is gasketed with a neoprene weather seal to provide a flush, tight, fit. Covers are insulated with 1” (25) of fibreboard and are designed to support a snow load of 40 lbs. per square foot. The frame for the RHG Series is 14 gage galvanized steel and the frame for the RHA Series is .090” aluminum.

    Curb - Curbs are 12" (305) high with 4" (102) wide rounded corner flashing flangecomplete with 1" (25) fibreboard insulation.

    Hinge - Formed steel hinges with stainless steel pins.

    Finish - RHG Series is a primed white finish. RHA Series is an aluminum mill finish.

    Opening - Hydraulic column operators allow cover to open and close easily.

    Device - Cover is equipped with an automatic hold open arm with a red vinyl grip release that keeps the cover in an open position when needed, and allows for easy control when lowering the latch cover.

    Handle - Self latching outside cadmium plated steel turn handle with inside lever handle allows cover to always latch securely.

    Latch - Locking hasps are located both inside and outside of the cover. All hardware is cadmium plated steel.

  • Click for specsheet

    Click for downloads

    List Price

     

    Specifications:The MIFAB® WID exterior access doors are designed to provide convenient access to any exterior application, or anywhere that requires protection against air leakage and/ or water penetration. WID doors are also designed to serve the custom air handling equipment manufacturers, as well as mechanical contractors who field assemble built-up air handling systems. All WID doors are manufactured with extruded aluminum flanged frames and door panel frames. Door panels are satin coat steel with optional stainless steel and aluminum sheet inserts. Door panels are insulated and gasketed. WID doors can be manufactured in custom sizes from 12” x 12” to 96” x 96”. Consult the factory for larger applications.

    Flanged Frame: .080" extruded aluminum
    Door Panel Frame: .060" extruded aluminum
    Door Panels: 20 gauge satin coat steel, with optional stainless steel and aluminum sheet
    Insulation: .75 PCF fiberglass
    Handles: Dual Acting Handles for inside and out side operation
    Gasket: Extruded EPDM draft seal gasket
    Hinge: Zinc plated steel continuous type
    Optional Viewport: 9" x 9" or 12" x 12"
    Finish: Mill
    Door Thickness: 1", 1 1/2", 2" and 4" deep
    Size Range: 12" x 12" thru 96" x 96"
    Swing: Out-Swing (std) and In-Swing option
    Leakage Rated: 2.05 CFM, at a test pressure of 12.0 inches of water column. (WID 2.0)

     

  • Click for specsheet

    Click for downloads

    List Prices

     

    Specification: SeamlessTM Access Panels by MIFAB® are manufactured from GFRGIGFRC & 70% post-consumer recycled glass, for a unique GREEN design-matrix designed to blend seamlessly into your walls and ceilings. They consist of a surround frame and either a drop-in door or hinged door. Available in twenty standard residential or commercial sizes, MIFAB® panels are perfect for jobs where access is required at regular intervals.

    Function: Lightweight and easily textured, the panels can be used in both new and retrofit construction across unlimited applications. Their smart design to helps contractors work smarter faster and better, the Seamless™ panels feature a tapered edge for tape joints and won't shrink, crack or sag. Seamless™ Access Panels provide an aesthetically pleasing solution for a more attractive interior.

Returned 22 Results
Downloads
MIFAB, Inc.
1321 West 119th Street Chicago, IL 60643
Toll Free: 800.465.2736
Tel: 773.341.3030
Fax: 773.341.3047
E-mail: sales@mifab.com